Abstract:With the rapid development of key industries such as new energy vehicles, smart homes, smart phones and consumer grade drones, the demand for high performance miniature micro- pressure sensors is also growing promptly. At prssent, most of the pressure sensors of this type adopt a C-type structure, and the thickness of the sensitive diaphragm needs to be continuously thinned in order to improve the sensitivity of this type sensor, which leads to its sensitivity to etching errors and makes it difficult to ensure the linearity of the pressure sensor. Based on this, we designed a miniature micro-pressure half active Wheatstone bridge piezoresistive pressure sensor with C-type square diaphragm structure, whose area is reduced by shortening the number of leads and pads, through ion impantation on the surface of the diaphragm to create a piezoresistors, using deep reactive ion etching (DRIE) technology to release the pressure sensitive diaphragm with length of 460 μm × 460 μm, thinkness of 7.5 μm. The buried oxygen layer in the SOI(silicon on insulator) can play a role of stopping the etching, which assures the uniformity of the released sensitive diaphragm and the non-linear errors of the sensor while maintains its sensitivity. In this paper, the influence of piezoresistor position offset on the performance of the pressure sensor is analyzed by means of simulation, which improves the accuracy of the designed model and guarantees its performance parameters can meet the design indicators. Finally, the static characteristics of the sensor is calibrated. The experimental results show that the sensitivity of the sensor is up to 0.538 mV kPa-1/3.5 V in the range of 40 kPa at room temperature, and the non-linear error is only 0.386 % FS. This study provides some new ideas and references for the design work of high performance micro-pressure sensors.

The Novel Structural Design for Pressure Sensors

A Flexible Crosstalk-Free Piezoresistive Pressure Sensor Array Based on Interdigital-Electrode for High-Precision Pressure Mapping

Design and Optimization of a Highly Sensitive and Linearity Piezoresistive Pressure Sensor Based on a Combination of Cross Beam-Peninsula-Membrane Structure

The Development of a New Piezoresistive Pressure Sensor for Low Pressures

Mechanical Structural Design of a Piezoresistive Pressure Sensor for Low-Pressure Measurement: A Computational Analysis by Increases in the Sensor Sensitivity

A Novel Structure of Pressure Sensors

Designing the Sensing Structure of a Certain Micro Piezoresistive Pressure Sensor

Structural Analysis of Micromachined Piezoresistive Pressure Sensors for Dynamic Pressure Measurements

Micro-Pressure Sensor Dynamic Performance Analysis

A Novel Piezoresistive Sensitive Structure for Micromachined High-Pressure Sensors.

A piezoresistive pressure sensor with improved sensitivity in low pressure condition

The Design and Optimization of a Highly Sensitive and Overload-Resistant Piezoresistive Pressure Sensor.

A novel pressure sensor design for low pressure ranges

A New Silicon Diaphragm Pressure Sensor and Its Stress Analysis

A Structure Optimized Design and Simulation Analysis of a Wide Range Pressure Sensor

Structural Engineering in Piezoresistive Micropressure Sensors: A Focused Review

A Novel Pressure Microsensor with 30- $\mu \Hbox{m}$-Thick Diaphragm and Meander-Shaped Piezoresistors Partially Distributed on High-Stress Bulk Silicon Region

Design of Diaphragm Structure for Piezoresistive Pressure Sensor Using Topology Optimization

A Novel Pressure Sensor Structure for Integrated Sensors

Special Micro-electro-mechanical Systems Pressure Sensor

Design and fabrication of a tiny micro-pressure sensor with improved linearity and sensitivity