Abstract:In this study, three cationic surfactants (hexadecyltrimethylammonium chloride, hexadecyldimethylbenzylammonium chloride, and octadecyltrimethylammonium chloride) were used to modify montmorillonite and polyethylene (PE)/maleic anhydride grafted polyethylene (PE-g-MAH)/organic-montmorillonite (Org-MMT) nano-composites, prepared by two blending processes (direct-melt blending and solution blending). X-ray diffractometry and transmission electron microscopy were used to investigate the intercalation behavior and microstructure of composites. Mechanical properties were also tested. It was found that the intercalation effect of PE/PE-g-MAH/Org-MMT could be enhanced by increasing the content of PE-g-MMT, using the silicate modified by a cationic surfactant with a benzyl group or long alkyl chain, adopting the solution-blending method or using high-density polyethylene as matrix. The degree of crystallinity of composites and the crystalline thickness perpendicular to the crystalline plane [like (110) and (200)] decreased with increasing amounts of PE-g-MAH and, under certain prescription, the crystalline thickness of the composite made by the solution method was much smaller than that made by direct-melt blending. This clearly showed that Org-MMT and PE-g-MAH had a heterogeneous nucleation effect on crystallization of PE from the melt, resulting in a decrease of crystalline thickness, and the heterogeneous nucleation effect was more evident in the nanocomposite made by the solution-blending method than in that made by the direct-melt intercalation process. The tensile strength initially increased and then decreased with increasing contents of PE-g-MAH. The maximum value in tensile strength (23.3 MPa) was achieved when the concentration of PE-g-MAH was 6 wt %. The impact strength increased concomitantly with the content of PE-g-MAH; it was 122.2 J/m when the concentration of PE-g-MAH was 9 wt %. (C) 2004 Wiley Periodicals, Inc.

Studies on EVA/Organic Montmorillonite Treated by Compound Swelling Agent Nanocomposites

Synergetic Effect of a Reactive Compatibilizer and Organo-montmorillonite on the Dispersion of Polyamide 6 /Polydimethylsilicone Blend with a High Viscosity Ratio

In-situ Synthesis, Thermal and Mechanical Properties of Biobased Poly(ethylene 2,5-Furandicarboxylate)/montmorillonite (PEF/MMT) Nanocomposites

Preparation and Characterization of Eva/Mmt Nanocomposites

Influence of organophilic clay and preparation methods on EVA/montmorillonite nanocomposites

Structure And Properties Of Nanocomposites Prepared By Directly Melt Blending Ethylene-Co-Vinylacetate And Natural Montmorillonite

SWELLING BEHAVIOR OF MONTMORILLONITE, RHEOLOGICAL BEHAVIOR OF MONTMORILLONITE AQUEOUS SUSPENSION AND BLEND OF SUSPENSION AND EMULSION

Preparation and Flammability of Ethylene-Vinyl Acetate Copolymer/montmorillonite Nanocomposites

Preparation and characterization of organic modified montmorillonite/polylactic acid nanocomposites

Preparation and structure of poly(styrene-acrylonitrile)/montmorillonite nanocomposite

NOVEL ORGANIC MODIFICATION OF MONTMORILLONITE BY SOLID-STATE REACTION WITH EPOXY COMPOUND

Effect of organophilic montmorillonite on polyurethane/montmorillonite nanocomposites

Synthesis of Montmorillonite /poly(acrylic Acid) Super Absorbent Resin

Polyethylene/maleic Anhydride Grafted Polyethylene/organic‐montmorillonite Nanocomposites. I. Preparation, Microstructure, and Mechanical Properties

Preparation and Properties of PA6/Epoxy-resin-modified Montmorillonite Nanocomposites

Joint Effect of Compatibilizer and Organo-Montmorillonite on Compatibilization of Polyamide-6/Poly(Phenylene Oxide) Blend: Morphology and Properties

Preparation of Exfoliated Low-density Polyethylene/Montmorillonite Nanocomposites Through Melt Extrusion

Preparation and properties of amphiphilic hydrophobically associative polymer/ montmorillonite nanocomposites

[Study on the Structure and Nanomechanical Properties of Organic Montmorillonite Reinforced Urea-Formaldehyde Adhesive]

Preparation and Investigation of Ethylene–vinyl Acetate Copolymer/silicone Rubber/clay Nanocomposites

Organic Montmorillonite Reinforced Epoxy Mortar Binders