Abstract:In this study, three cationic surfactants (hexadecyltrimethylammonium chloride, hexadecyldimethylbenzylammonium chloride, and octadecyltrimethylammonium chloride) were used to modify montmorillonite and polyethylene (PE)/maleic anhydride grafted polyethylene (PE-g-MAH)/organic-montmorillonite (Org-MMT) nano-composites, prepared by two blending processes (direct-melt blending and solution blending). X-ray diffractometry and transmission electron microscopy were used to investigate the intercalation behavior and microstructure of composites. Mechanical properties were also tested. It was found that the intercalation effect of PE/PE-g-MAH/Org-MMT could be enhanced by increasing the content of PE-g-MMT, using the silicate modified by a cationic surfactant with a benzyl group or long alkyl chain, adopting the solution-blending method or using high-density polyethylene as matrix. The degree of crystallinity of composites and the crystalline thickness perpendicular to the crystalline plane [like (110) and (200)] decreased with increasing amounts of PE-g-MAH and, under certain prescription, the crystalline thickness of the composite made by the solution method was much smaller than that made by direct-melt blending. This clearly showed that Org-MMT and PE-g-MAH had a heterogeneous nucleation effect on crystallization of PE from the melt, resulting in a decrease of crystalline thickness, and the heterogeneous nucleation effect was more evident in the nanocomposite made by the solution-blending method than in that made by the direct-melt intercalation process. The tensile strength initially increased and then decreased with increasing contents of PE-g-MAH. The maximum value in tensile strength (23.3 MPa) was achieved when the concentration of PE-g-MAH was 6 wt %. The impact strength increased concomitantly with the content of PE-g-MAH; it was 122.2 J/m when the concentration of PE-g-MAH was 9 wt %. (C) 2004 Wiley Periodicals, Inc.

Effect of organophilic montmorillonite on polyurethane/montmorillonite nanocomposites

Preparation and Properties of Polyurethane/Montmorillonite Nanocomposites Cured under Room Temperature

Effect of Surface Modification of Montmorillonite on the Properties of Rigid Polyurethane Foam Composites

In-situ Synthesis, Thermal and Mechanical Properties of Biobased Poly(ethylene 2,5-Furandicarboxylate)/montmorillonite (PEF/MMT) Nanocomposites

Synthesis and Characterization of Polyurethane/Montmorillonite Nanocomposites by in Situ Polymerization

Preparation and characterization of organic modified montmorillonite/polylactic acid nanocomposites

A Study on Structure and Mechanical Properties of Polyurethane/Organic-Montmorillonite Nanocomposites

Study on Polyurethane/Mdi-Modified-Organic Montmorillonite Nanocomposites

The synthesis and characterization of polyurethane/clay nanocomposites

Structure and Property of Pu/Mmt Nanocomposites by In-Situ Polymerization

Synthesis and Characterization of Thermoplastic Polyurethane/montmorillonite Nanocomposites Produced by Reactive Extrusion

Study of elastomeric polyurethane nanocomposites prepared from grafted organic–montmorillonite

A Study on the Synthesis and Properties of Polyurethane/Clay Nanocomposites

Preparation and Characterization of Pu/Mommt Nanocomposites

Polyethylene/maleic Anhydride Grafted Polyethylene/organic‐montmorillonite Nanocomposites. I. Preparation, Microstructure, and Mechanical Properties

Preparation and Properties of Pu/Mcmmt Nanocomposites

Preparation and characterization of poly(propylene carbonate)/montmorillonite nanocomposites by solution intercalation

Study on thermoplastic polyurethane/montmorillonite nanocomposites

Synthesis of Polyurethane/clay Intercalated Nanocomposites

Study of Nanocomposites Prepared by Melt Blending Tpu and Montmorillonite

A Study of PU/MMT Nanocomposites