Abstract:Polymers are widely used in our day-to-day lives and we are often oblivious to the fire hazard imposed by these hydrocarbon-based materials. This paper introduces the application of fire retardant nanofillers for enhanced flame retardancy as a potential remedy for flame spread. The paper also investigates changes in mechanical properties as a result of nanofiller addition. For this purpose, neat polystyrene (PS), PS-silica and PS-montmorillonite (MMT) have been prepared via in-situ polymerization method. The thermal degradation mechanism of the neat polymer and polymer nanocomposites and the effect of nanoparticle loading on thermal properties have been investigated using Thermogravimetric Analysis (TGA) and Differential Scanning Calorimetry (DSC) equipment. TGA and corresponding Derivative TG (DTG) results show that there has been improvement in thermal stability for the nanocomposites. PS-1 wt% silica and PS-3 wt% silica nanocomposites have shown approximately 23% and 15% reduction of Peak Mass Loss Rate (PMLR) respectively. The polymer nanocomposites also showed 72–87% more char yield with respect to neat PS. The glass transition temperature (Tg) as measured by the DSC was comparable to those obtained by the Dynamic Mechanical Analysis (DMA) and the greatest agglomeration was observed for PS-3 wt% MMT. According to the nanoindentation results, there was reduction in hardness of the nanocomposites compared to the neat polystyrene. It was concluded that the addition of nanosilica and nanoclay in small loading can significantly improve thermal stability and mechanical properties; however, higher loading may result in agglomeration and reduction in hardness.

Preparation and Investigation of Ethylene–vinyl Acetate Copolymer/silicone Rubber/clay Nanocomposites

Synthesis of novel poly(aminophosphonate ester)s flame retardants and their applications in EVA copolymer

Study of Thermal and Mechanical Behaviors of Flame Retardant Polystyrene-Based Nanocomposites Prepared Via In-Situ Polymerization Method

Influence of Fe-MMT on the fire retarding behavior and mechanical property of (ethylene-vinyl acetate copolymer/magnesium hydroxide) composite

Preparation and Flammability of Ethylene-Vinyl Acetate Copolymer/montmorillonite Nanocomposites

Morphology, Thermal, and Mechanical Properties of Flame-Retardant Silicone Rubber/Montmorillonite Nanocomposites

Simultaneously improving mechanical strength, hydrophobic property and flame retardancy of ethylene vinyl acetate copolymer/intumescent flame retardant/FeOOH by introducing modified fumed silica

Synergistic Properties of Microencapsulated Intumescent Flame Retardant-Organically Modified Montmorillonite/ethylene-Vinyl Acetate Copolymer Composites

Nano-enhanced thermo-mechanical properties of ethylene vinyl acetate with intumescent agent and organoclays

Effects of Silicon Additive As Synergists of Mg(OH)2 on the Flammability of Ethylene Vinyl Acetate Copolymer

Nanoclay, intumescent flame retardants, and their combination with chemical modification for the improvement of the flame retardant properties of polymer nanocomposites

A novel EVA-based composite via ceramization toward excellent flame retardance performance and high-temperature resistance

The Impact of Metal Oxides on the Combustion Behavior of Ethylene-Vinyl Acetate Coploymers Containing an Intumenscent Flame Retardant

Flame retardant synergism of rubber and Mg(OH)2 in EVA composites

Preparation and characterization of ethylene–vinyl acetate copolymer (EVA)–magnesium hydroxide (MH)–hexaphenoxycyclotriphosphazene (HPCTP) composite flame-retardant materials

Flame Retardation of Ethylene-Vinyl Acetate Copolymer Using Nano Magnesium Hydroxide and Nano Hydrotalcite

Preparation, thermal and flammability of halogen‐free flame retarding thermoplastic poly(Ether‐Ester) elastomer/montmorillonite nanocomposites

Effect of Electron Beam Irradiation on the Mechanical and Thermal Properties of Intumescent Flame Retarded Ethylene-Vinyl Acetate Copolymer/Organically Modified Montmorillonite Nanocomposites

Combustion Behavior and Thermal Stability of Ethylene-Vinyl Acetate Composites Based on CaCO3-containing Oil Sludge and Carbon Black

Vulcanization kinetics and mechanical properties of filled ethylene-vinyl acetate copolymer rubber composites

In situ preparation of MoS2@Fe3O4 by radiation method and its application in flame retardancy, mechanical properties, and friction properties of EVA composites