Abstract:Graphite/copper joints are prepared by brazing with Cu‐50TiH2 filler. The influence of the interfacial structure on the microstructure and mechanical properties of graphite/copper joints is investigated. Straight and zigzag interfacial configurations are designed. The microstructure and compositions on the brazing interface are observed and analyzed, and the shear strength of the joints is evaluated. The interfacial morphologies show a good metallurgical combination with no apparent defects. The interfacial transition layer mainly consists of a Cu‐based solid solution, Ti‐Cu intermetallic compound, and small amounts of TiC near the graphite substrate. The widths of the transition layer are ≈25–50 and 490 μm, respectively, for straight and zigzag interfacial configurations. There is a high hardness region that corresponds to the transition layer close to the graphite matrix. The shear strength of the joint with a zigzag structure interface can reach 17.9 MPa, which increases by 2.75 times compared to that of the straight interface. The zigzag structure between the graphite and the transition layer effectively improves the joint strength due to the increases in the bonding area and deflection of the fracture path. Graphite/copper joints are prepared by brazing with Cu‐50TiH2 filler. The influence of the interfacial structure on the microstructure and mechanical properties of graphite/copper joints is investigated. The zigzag structure between the graphite and the transition layer effectively improves the joint strength due to the increases in the bonding area and deflection of the fracture path.

Microstructure and mechanical properties of carbon/carbon composites and TC4 joints

Interfacial structure and mechanical properties of contact-reaction TC4/TC4 joint brazed with copper filler

Microstructure and mechanical properties of C/C composite joint brazed with Ni-based filler

Effect of Laser Cladding TiC on Microstructure and Mechanical Properties of TC4|C/C Bonded Joint

Microstructure and mechanical properties of Si3N4 ceramic and (TiB + Y2O3)/Ti matrix composite joints brazed with AgCu/Cu foam/AgCu multilayered filler

Microstructure and mechanical properties of TC4 joints brazed with Ti–Zr–Cu–Sn amorphous filler alloy

Interfacial Microstructure and Mechanical Properties of TC4 Titanium Alloy/316L Stainless Steel Joint Brazed with Ag70.5Cu27.5Ti2 Filler Metal

Brazing of C/C Composite and TiAl Alloy Using TiNiSi Filler Metal Added Cu Interlayer

Microstructure and Mechanical Properties of Dissimilar TC4 Titanium Alloy/304 Stainless Steel Joint Using Copper Filler Wire

Brazing of C/C composites and 304 stainless steels via Ni/Mo composite interlayer

Microstructure and properties of different carbon fiber reinforced ceramic composites brazed joint by Si-Ti alloy filler

Effect of C/C Composite Surface Pretreatment on Properties of Brazed Joint

Microstructural evolution and mechanical property of a SiCf/SiC composite/Ni-based superalloy joint brazed with an Au-Cu-Ti filler

Microstructure and Performance of Graphite/Copper Joints by Brazing with Different Interfacial Structures

Joints of Continuous Carbon Fiber Reinforced Lithium Aluminosilicate Glass Ceramics Matrix Composites to Ti60 Alloy Brazed Using Ti-Zr-Ni-Cu Active Alloy

Optimization of the Microstructure and Mechanical Properties of a TC4 Alloy Joint Brazed with a Zr-Based Filler Containing a Co Element

Microstructure and mechanical properties of C/C composite| Ti3Al alloy joints prepared by transient liquid phase diffusion bonding using AgCuNiLi alloy as joining material

Microstructure and Shear Strength of SiC Joint Brazed with LiAlSiO4 Reinforced AgCuTi Composite Filler

Microstructure and Mechanical Properties of Al2O3/Cu Joints Brazed with Ag–Cu–Ti+Zn Composite Fillers

Brazing of TC4 Alloy Using Ti-Zr-Ni-Cu-Sn Amorphous Braze Fillers

Study on the structure and thermal properties of graphite/copper laminated composites assembled by Ti-containing active filler metals