Abstract:Flexible ultrafine SiC fibers with superior high-temperature stability and excellent oxidation resistance are regarded as one of the most promising materials for high-temperature applications. However, excess oxygen and carbon in the ultrafine SiC fibers limit their thermal stability due to decomposition of the SiCxOy phase. In the present work, flexible ultrafine nearly stoichiometric polycrystalline SiC fibers were fabricated by combining the electrospinning technique and polymer-derived ceramic method. The ultrafine SiC fibers exhibited superior high-temperature stability and oxidation resistance. The retention rates of tensile strength were 90.0 %, 94.2 % and 86.4 % after heat treatment in argon at 1800 °C, 1900 °C and 2000 °C, respectively. TG results of the fibers showed little weight loss of only 1.52 % at 1900 °C in Ar and the weight gain of only 4.1 % up to 1500 °C in air. Such improved thermal stability was achieved through sintering at high temperature for elimination of excess oxygen and carbon with Al doped as the sintering aid to restrain the grain coarsening. The ultrafine SiC fibers still exhibited excellent flexibility without obvious damage when they were heated by the butane blowtorch flame of about 1100 °C in air. Furthermore, the infrared thermography illustrated that the ultrafine SiC fiber membrane also had good thermal insulation performance. The outstanding mechanical properties and thermal stability of ultrafine SiC fibers suggest their potential applications at the high temperature and harsh environment.

Preparation Of Compact And Ultra-Thin Si-Al-C Anti-Oxidation Film On Fibers Of Carbon Felt

Crucial roles of egg white liquid in preparing excellent SiC anti-oxidation coatings on carbon felt fibers

Preparation and characterization of super hydrophobic aerogel coated ultra-high molecular weight polyethylene fabric

Fabrication of SiC ultrafine fiber with low oxygen content by electrospinning, thermal curing and pyrolysis of cyano-polycarbosilane

SiC Micro-Threads Prepared Within the Carbon Fiber Felt

Influence of SiC Coating on Antioxidation Property of Carbon Fibers

Oxidation resistance improvement of carbon fiber nonwoven fabrics through SiC coating technology

Carbon-Fiber Felt Reinforced Carbon/Alumina Aerogel Composite Fabricated with High Strength and Low Thermal Conductivity

Oxidation protection of carbon fibers by a reaction sintered nanostructured SiC coating

Preparation and Characterization of Alumina-coated Hollow Quartz Fiber Reinforced Al2O3-SiO2 Aerogel Composite

Preparation and oxidation behavious of SiO2 and SiC coating 3-D braided carbon fiber

Preparation and Properties of SiOC Ceramic Modified Carbon Fiber Needled Felt Preform Composites

Preparation and anti-oxidation properties of Si(O)C coated carbon-bonded carbon fibre composites

Influence Of Sic Coating On The Oxidation Behavior Of Pan Carbon Fiber At Elevated Temperatures

Thermal and oxidation protection of carbon fiber by continuous liquid phase pre-ceramic coatings for high temperature application

Preparation and Characterization of Novel Fe2o3-Flaky Coated Carbon Fiber by Electrospinning and Hydrothermal Methods

Fabrication of SiC nanofiber aerogel felt with high-temperature thermal insulation performance

Facile Preparation of a SiC@SiO2 Nanowire-Toughened ZrB2–SiC/SiC Bilayer Coating with Good Interfacial Bonding, High Toughness, and Excellent Cyclic Ablation Resistance on C/CA Composites

Ordered Silica Nanoparticles Grown on a Three-Dimensional Carbon Fiber Architecture Substrate with Siliconborocarbonitride Ceramic as a Thermal Barrier Coating.

Flexible ultrafine nearly stoichiometric polycrystalline SiC fibers with excellent oxidation resistance and superior thermal stability up to 1900 °C

Preparation & characterization of composite with micron AI coating in nanometer Fe particles