Abstract:Carbon-fiber-reinforced carbon-silicon carbide (C/C-SiC) composites were prepared by impregnating carbon fibers with ethynylphenyl-terminated poly(silylene-acetylene) (EPTSA) as a single-source precursor with subsequent hot pressing and pyrolysis. The structural evolution, crystallization behavior, and graphitization of bulk C-SiC ceramics, as well as their mechanical properties and ablation behavior, were investigated. The EPTSA precursor starts to transform into inorganic SiC ceramic materials at 800 degrees C, which is characterized by an amorphous structure with weight loss, shrinkage, and densification between 800 and 1000 degrees C. The formation of SiC crystals inhibited the growth of the graphitic structure between 1000 and 1200 degrees C. As the temperature was raised, both graphite and SiC crystals continued to grow, and the crystalline forms became more complete. The carbon-fiber cloth (T300CF)-reinforced C-SiC composite (T300CF/C-SiC) prepared using polymer infiltration and pyrolysis (PIP) exhibited excellent mechanical properties. After five PIP cycles, the flexural strength, flexural modulus, and interlaminar shear strength of the T300CF/C-SiC composite reached 169 MPa, 32.5 GPa, and 9.38 MPa, respectively. In addition, the chopped-carbon-fiber-reinforced C-SiC composite fabricated using the PIP process demonstrated good oxyacetylene-torch ablation properties.

SiC Micro-Threads Prepared Within the Carbon Fiber Felt

Properties of Carbon Nano-Tubes–cf/sic Composite by Precursor Infiltration and Pyrolysis Process

Microstructures of the Si-SiC Composites Made by the Reaction Sintering of Liquid Silicon and Carbon Felt

Study of Rapid Fabrication and Microstructure of C/C-SiC Composites

Preparation Of Compact And Ultra-Thin Si-Al-C Anti-Oxidation Film On Fibers Of Carbon Felt

SiC/SiO2 core–shell nanocables formed on the carbon fiber felt

Crucial roles of egg white liquid in preparing excellent SiC anti-oxidation coatings on carbon felt fibers

Microstructures of a carbon-fiber-reinforced silicon-carbide composite produced by precursor pyrolysis and hot pressing

Preparation and mechanical behaviors of multiscale SiC nanowires/carbon fiber reinforced silicon oxycarbide ceramic composites

In Situ Growth of SiC Nanofibers on PAN Carbon Fibers in Vapor of Silicon

Fabrication of SiC ultrafine fiber with low oxygen content by electrospinning, thermal curing and pyrolysis of cyano-polycarbosilane

Preparation and Properties of SiOC Ceramic Modified Carbon Fiber Needled Felt Preform Composites

Characterization of the Microstructure of Three‐Dimensional‐Needled Carbon/Silicon Carbide Composites

In-situ synthesis and microstructural evolution of a SiC reinforced Al-50Si composite exhibiting exceptional thermal properties

Microstructural Analysis of Novel Preceramic Paper-Derived SiCf/SiC Composites

Processing Continuous Submicro/Nano SiC Fibers by Electrospinning

Microstructure and mechanical properties of SiC f /SiC composite prepared by chemical vapor infiltration

Fabrication of SiC nanofiber aerogel felt with high-temperature thermal insulation performance

Microstructure and mechanical properties of short-carbon-fiber/Ti3SiC2 composites

C/C–SiC Composites Derived from Single‐source Poly(silylene–acetylene) Precursors

Microstructure Characterization by X-Ray Computed Tomography of C/C-SiC Ceramic Composites Fabricated with Different Carbon Fiber Architectures