Abstract:The outstanding diffusivity and permeability of supercritical carbon dioxide (scCO2) are extremely beneficial for grafting reaction. In this work, aramid fibers (AF) are modified in scCO2 by glycidyl-polyhedral oliomeric silsesquioxane (POSS) with 2-ethyl-4-methylimidazole (2E4MZ) on the basis of cleaning with acetone. The surface morphology and chemical structure of the modified AF were measured and characterized by Fourier transform infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS), Scanning electron microscope (SEM), Thermogravimetric (TG), and Atomic force microscope (AFM). The interfacial shear strength (IFSS) was measured by a micro-bond pull-out test, then the modified AF/EP composites were prepared and the interlaminar shear strength (ILSS) was characterized. Research has shown that some of the glycidyl-POSS molecular chains permeated into the surface of the fiber and grafted onto the surface of the AF after modification, and the other glycidyl-POSS self-assembled on the surface of the fiber. XPS indicated the introduction of C–O and –COO–, which confirmed the existence of chemical reactions between AF and glycidyl-POSS. AFM and SEM images revealed that 2E4MZ, not only promoted the grafting reaction of glycidyl-POSS, but also intensified the self-assembly of glycidyl-POSS, both of which increased the roughness of the fiber. A monofilament tensile test and micro-bond pull-out test showed that there was a negative effect on the tensile strength after scCO2 processing. The tensile strength of modified AF, with glycidyl-POSS, increased the highest strength of 25.7 cN dtex−1, which was 8% higher than that of pristine AF. The improvement of ILS roughness and the polar chemical groups produced in grafting reaction. These results indicated that AF, treated in scCO2, with glycidyl-POSS, which is a suitable way of fiber modification, can significantly improve the surface adhesion of AF reinforced composites.

Effect of grafting alkoxysilane on the surface properties of kevlar fiber

Effect of Irradiation Grafting Epoxy on Surface Characteristics of Carbon Fibers and Mechanical Properties of Composites

Effects of carbon fibers modification on the properties of unsaturated polyester self-healing composites

Surface modification of Kevlar fibre fabric and its influence on the properties of Kevlar/epoxy composites

Surface Modification of Kevlar Fiber by Nanosio2 Deposition in Supercritical Fluid

Surface Modification of Aramid Fibers by Amino Functionalized Silane Grafting to Improve Interfacial Property of Aramid Fibers Reinforced Composite

Improved Interfacial Properties of Carbon Fiber/epoxy Composites Through Grafting Polyhedral Oligomeric Silsesquioxane on Carbon Fiber Surface

Effect of Surface Treatment on the Mechanical and Tribological Performance of Kevlar Pulp Reinforced Epoxy Composites

Effect of Γ-Ray Irradiation Grafting on the Carbon Fibers and Interfacial Adhesion of Epoxy Composites

Effect of surface functionalization on the surface and inter-facial properties of thermoplastic-coated carbon fibers

Interfacially Reinforced Carbon Fiber Composites by Grafting Modified Methylsilicone Resin

Characterization of fiber/matrix interfacial bonding strength of chemically grafted aramid fiber surface with epoxy resin composites

Surface grafting modification of carbon fibers by γ-ray pre-irradiation and plasma technique

Surface Modification of Carbon Fibers by Grafting PEEK-NH2 for Improving Interfacial Adhesion with Polyetheretherketone

The Modification of Kevlar Fibers in Coupling Agents by Γ -Ray Co-Irradiation

Surface modification of the kidney section carbon fibers by radiation grafting epoxy

Effect of Different Graft Polymerization Systems on Surface Modification of Aramid Fibers with Γ-Ray Radiation

Surface Analysis of Plasma Grafted Carbon Fiber

Study on Surface Properties of Aramid Fiber Modified in Supercritical Carbon Dioxide by Glycidyl-POSS

Nondestructive Grafting of ZnO on the Surface of Aramid Fibers Followed by Silane Grafting to Improve Its Interfacial Adhesion Property with Rubber

Surface Treatment and Dipping Procrss of Kevlar Fiber