Abstract:Heat treatment‐induced surface modification method was used to change the reactive groups on AFs. The number of ester groups greatly increased, which enhanced the reactivity of AFs in epoxy matrix. Meanwhile, the contact angle between AFs and epoxy droplet could be significantly decreased to 54.7° The large‐scale pretreatment and efficient surface activation of aramid fibers (AFs) before composite fabrication remains a major challenge. In this study, we developed a heat treatment–induced surface modification method to change the reactive groups on AFs. Results indicated that the O/C ratio and the number of ester groups on the AFs as well as the surface morphology of the AFs could be flexibly controlled using the heat treatment–induced surface modification method. Furthermore, the surface oxidation mechanism of the AFs changed from point oxidation to surface oxidation during heat treatment. As the heat‐treatment time increased, the crystallinity and tensile strength of the AF monofilament considerably increased. An optimal heat‐treatment time of 30 min was provided considering that long‐time heating (>30 min) would destroy the surface molecular chains. Under this optimal heat‐treatment time, the number of ester groups reached the maximum, which enhanced the reactivity of the AFs in the epoxy resin matrix. The interfacial shear strength between the AFs treated for 30 min and epoxy resin microdroplet increased by 12.64%, reaching as high as 18.17 MPa. Moreover, the contact angle between the AF monofilament and epoxy resin droplet reached a minimum value of 54.7°. Furthermore, the thickness of the interfacial bond layer between the AFs and epoxy resin reached 50–60 nm. These results provide effective theoretical guidance for the large‐scale application of AFs in composite materials.

Characterization of fiber/matrix interfacial bonding strength of chemically grafted aramid fiber surface with epoxy resin composites

Effect of Irradiation Grafting Epoxy on Surface Characteristics of Carbon Fibers and Mechanical Properties of Composites

Preparation of highly active aramid fiber and effect on the interface property of aramid/epoxy composites

Surface modification of Kevlar fibre fabric and its influence on the properties of Kevlar/epoxy composites

Construction of an Interfacial Layer of Aramid Fibers Grafted with Glycidyl POSS Assisted by Heat Treatment and Evaluation of Interfacial Adhesion Properties with Epoxy Resin

Effects of aramid nanofibers on the mechanical properties of epoxy resin and improved adhesion with aramid fiber

Surface Ammonification Of The Mutual-Irradiated Aramid Fibers In 1,4-Dichlorobutane For Improving Interfacial Properties With Epoxy Resin

Enhancement of Para-Aramid Fibers by Depositing Poly-P-paraphenylene Terephthalamide Oligomer Modified Multi-Walled Carbon Nanotubes

Improved dielectric and mechanical properties of aramid fiber reinforced epoxy resin composites by polyethyleneimine grafting

Tensile and Interfacial Mechanical Properties for Single Aramid III Fibers under Dynamic Loading

Non-destructive modification of aramid fiber by building nanoscale-coating solution to enhance the interfacial adhesion properties of the fiber-reinforced composites

Protonated benzimidazole segment induced interfacial limited linear grafting in aramid fiber/epoxy resin interface towards strong and tough composites

Surface Modification of Carbon Fibers by Grafting PEEK-NH2 for Improving Interfacial Adhesion with Polyetheretherketone

The effect of simultaneous fiber surface treatment and matrix modification on mechanical properties of unidirectional ultra-high molecular weight polyethylene fiber/epoxy/nanoclay nanocomposites

Improving the Mechanical and Surface Properties of Aramid Fiber by Grafting with 1,4-Dichlorobutane under Supercritical Carbon Dioxide

Influence of Polyamide Acid Coating Reaction on the Properties of Aramid Fibre

Latent active unit triggered crosslinking inside aramid fiber with improved transverse connection and composite properties

Unravelling the Influence of Surface Modification on the Ultimate Performance of Carbon Fiber/Epoxy Composites

Effects of oxidation‐induced aggregation structure transformation of aramid fiber on interfacial adhesion of epoxy resin

Improving the Interfacial Adhesion of Long Carbon Fiber-Reinforced Polyamide 6 Composites by Electrochemical Oxidation and Polyethylenimine-Carboxymethyl Cellulose Grafting

Enhancing fiber/matrix interface adhesion in polymer composites: Mechanical characterization methods and progress in interface modification