Abstract:With extensive application of infrared detective techniques, Stirling cryocoolers, used as an active cooling source, have been developed vigorously in China. After the cooler's cooling performance can satisfy the mission's request, its reliability level is crucial for its application. Among all the possible failure mechanisms, gas contamination has been found to be the most notorious cause of cooler's performance degradation by failure analyses. To analyze the characteristic of gas contamination, some experiments were designed and carried out to quantitatively analyze the relationship between failure and performance. Combined with the test results and the outgassing characteristic of non-metal materials in the cryocooler, a degradation model of cooling performance was given by T(t)=T0+A[1-exp(-t/B)] under some assumptions, where t is the running time, T is the Kelvin cooling temperature, and T0, A, B are model parameters, which can be given by the least square method. Here T0 is the fitting initial cooling temperature, A is the maximum range of performance degradation, and B is the time dependent constant of degradation. But the model parameters vary when a cryocooler is running at different cooling temperature ranges, or it is treated by different cleaning process. In order to verify the applicability of the degradation model, data fit analysis on eight groups of cooler's lifetime test was carried out. The final work indicated this model fit well with the performance degradation of space Stirling cryocoolers due to gas contamination and this model could be used to predict or evaluation the cooler's lifetime. Gaseous contamination will not arouse severe performance degradation until the contaminants accumulate to a certain amount, but it could be fatal when it works. So it is more serious to the coolers whose lifetime is more than 10,000 h. The measures taken to control or minimize its damage were discussed as well. To the long-life cryocooler, internal materials must be baked and organic/epoxy materials should be used as few as possible. Further more, pipeline for filling working fluid must have purifying facilities.

Performance and Reliability Characteristic of Stirling Cryocoolers in China

Performance Degradation Of Space Stirling Cryocoolers Due To Gas Contamination

Failure analysis of the space Stirling cryocoolers

Research and development of Stirling cryogenic refrigerator

Improvement of a Stirling type two-stage pulse tube cryocooler

Advances in high frequency pulse tube cryocooler research(PartⅠ)

Reliability screening of aerospace Stirling cryocoolers

Development of a two-stage pulse tube Stirling cryocooler

Performance Analysis on Free-Piston Stirling Cryocooler Based on an Idealized Mathematical Model

Cool Down Time Optimization of the Stirling Cooler

Failure analysis methods and procedures for Stirling cryocooler

Accelerated life test of Oxford type Stirling cryocooler

Design and primary experiments for a pneumatically driven split-Stirling cryocooler operating at hundred hertz range

Numerical Analysis on Performance and Contaminated Failures of the Miniature Split Stirling Cryocooler

A Two-Stage Thermally-Coupled Pulse Tube Cryocooler Working at 35 K for Space Application

Study on Cooling Capacity Characteristics of an Open-Cycle Joule-Thomson Cryocooler Working at Liquid Helium Temperature

Study on A 5.0 W/80 K Single Stage Stirling Type Pulse Tube Cryocooler

Thermo-adaptability of a 6 W@ 90 K space Stirling cryocooler

An Accelerated Life Model for Contamination Degradation of Stirling Cryocooler

A miniature Stirling cryocooler operating above 100 Hz down to liquid nitrogen temperature

Energy Analysis of a Single-Stage Stirling Pulse Tube Cryocooler