Abstract:With extensive application of infrared detective techniques, Stirling cryocoolers, used as an active cooling source, have been developed vigorously in China. After the cooler's cooling performance can satisfy the mission's request, its reliability level is crucial for its application. Among all the possible failure mechanisms, gas contamination has been found to be the most notorious cause of cooler's performance degradation by failure analyses. To analyze the characteristic of gas contamination, some experiments were designed and carried out to quantitatively analyze the relationship between failure and performance. Combined with the test results and the outgassing characteristic of non-metal materials in the cryocooler, a degradation model of cooling performance was given by T(t)=T0+A[1-exp(-t/B)] under some assumptions, where t is the running time, T is the Kelvin cooling temperature, and T0, A, B are model parameters, which can be given by the least square method. Here T0 is the fitting initial cooling temperature, A is the maximum range of performance degradation, and B is the time dependent constant of degradation. But the model parameters vary when a cryocooler is running at different cooling temperature ranges, or it is treated by different cleaning process. In order to verify the applicability of the degradation model, data fit analysis on eight groups of cooler's lifetime test was carried out. The final work indicated this model fit well with the performance degradation of space Stirling cryocoolers due to gas contamination and this model could be used to predict or evaluation the cooler's lifetime. Gaseous contamination will not arouse severe performance degradation until the contaminants accumulate to a certain amount, but it could be fatal when it works. So it is more serious to the coolers whose lifetime is more than 10,000 h. The measures taken to control or minimize its damage were discussed as well. To the long-life cryocooler, internal materials must be baked and organic/epoxy materials should be used as few as possible. Further more, pipeline for filling working fluid must have purifying facilities.

An Accelerated Life Model for Contamination Degradation of Stirling Cryocooler

Accelerated life test of Oxford type Stirling cryocooler

Accelerated Lifetime Evaluation for Oxford Type Stirling Cooler

Performance Degradation Of Space Stirling Cryocoolers Due To Gas Contamination

Performance and Reliability Characteristic of Stirling Cryocoolers in China

Performance Analysis on Free-Piston Stirling Cryocooler Based on an Idealized Mathematical Model

Contamination Failure Mechanism and Test of Miniature Mechanical Cryocooler

Failure analysis of the space Stirling cryocoolers

Failure analysis methods and procedures for Stirling cryocooler

Cool Down Time Optimization of the Stirling Cooler

A general model of Stirling refrigerators and its verification

Reliability screening of aerospace Stirling cryocoolers

A Study on the Interstage Cooling Capacity Shifting of Stirling/pulse Tube Hybrid Cooler Based on an Idealized Model

Theoretical and Experimental Study for the Transient Behavior of a Linear Compressor During Pulse Tube Cryocooler Cool Down Process

A New Empirical Life Prediction Model For 9-12%Cr Steels Under Low Cycle Fatigue And Creep Fatigue Interaction Loadings

Acoustic-Mechanical-Electrical (acme) Coupling Between the Linear Compressor and the Stirling-type Cryocoolers

Modeling and Experiments on Fast Cooldown of A 120 Hz Pulse Tube Cryocooler

Study on a Cascade Pulse Tube Cooler with Work Recovery

The thermodynamic characteristics of a Stirling/pulse tube hybrid cryocooler

Energy Analysis of a Single-Stage Stirling Pulse Tube Cryocooler

Theoretical model of a Stirling/Pulse tube hybrid refrigerator and its verification