Abstract:Electrical properties and electro-thermal behavior were studied in composites with carbon black (CB) or hybrid filler (CB and graphite) and a matrix of linear low-density polyethylene (LLDPE). LLDPE, a (co)polymer with low crystallinity but with high structural regularity, was less studied for Positive Temperature Coefficient (PTC) applications, but it would be of interest due to its higher flexibility as compared to HDPE. Structural characterization by scanning electron microscopy (SEM) confirmed a segregated structure resulted from preparation by solid state powder mixing followed by hot molding. Direct current (DC) conductivity measurements resulted in a percolation threshold of around 8% (w) for CB/LLDPE composites. Increased filler concentrations resulted in increased alternating current (AC) conductivity, electrical permittivity and loss factor. Resistivity-temperature curves indicate the dependence of the temperature at which the maximum of resistivity is reached (Tmax(R)) on the filler concentration, as well as a differentiation in the Tmax(R) from the crystalline transition temperatures determined by DSC. These results suggest that crystallinity is not the only determining factor of the PTC mechanism in this case. This behavior is different from similar high-crystallinity composites, and suggests a specific interaction between the conductive filler and the polymeric matrix. A strong dependence of the PTC effect on filler concentration and an optimal concentration range between 14 and 19% were also found. Graphite has a beneficial effect not only on conductivity, but also on PTC behavior. Temperature vs. time experiments, revealed good temperature self-regulation properties and current and voltage limitation, and irrespective of the applied voltage and composite type, the equilibrium superficial temperature did not exceed 80 °C, while the equilibrium current traversing the sample dropped from 22 mA at 35 V to 5 mA at 150 V, proving the limitation capacities of these materials. The concentration effects revealed in this work could open new perspectives for the compositional control of both the self-limiting and interrupting properties for various low-temperature applications.

Preparation and Temperature Coefficient of Resistance Characteristics of Nano-VO2/PEDT Composite

Cold-sintered V2O5-PEDOT:PSS Nanocomposites for Negative Temperature Coefficient Materials

Optimization of the Temperature-Dependent Electrical Resistivity in Epoxy/Positive Temperature Coefficient Ceramic Nanocomposites

Preparation And Characterization Of Conducting Polymer/Nano Silver Composites

Enhanced Thermoelectric Properties of Coated Vanadium Oxynitride Nanoparticles/PEDOT:PSS Hybrid Films

Study on Time-Dependent Resistance of Carbon Black-Loaded High-Density Polyethylene Composites During the Isothermal Course

Composites of Co-Doped Graphitic C3N4 Nanosheets and TiO2 Nanoparticles for Electrorheological Fluid Applications

Preparation and Electroactive Properties of a PVDF/nano-TiO2 Composite Film

A Novel Conductive Composites: Preparation And Electrical Property Of Polypyrrole Coated Carbon Nanotubes

Design for strontium-lead titanate based composite thermistor materials via chemical processing

The Influence of Molecular Weights on Dispersion and Thermoelectric Performance of Alkoxy Side-Chain Polythiophene/Carbon Nanotube Composite Materials

PREPARATION OF Ni@C/HDPE CONDUCTIVE COMPOSITES AND THEIR POSITIVE TEMPERATURE COEFFICIENT PERFORMANCE

Preparation and Characterization of Negative Temperature Coefficient (ni,mn) 3 O 4 –la(mn,ni)o 3 Composite

Effect of particle contact on the electrical performance of NTC-epoxy composite thermistors

Synthesis and Semiconductor Characteristics of Poly[(2-methoxy,5-octoxy)1,4- Phenylenevinylene-Carbon Nanotube Composites

Enhanced Dielectric Properties of Polyvinylidene Fluoride Nanocomposites Via Calcium Copper Titanate Nanofibers

Preparation and Characterization of N-doped TiO2/C Composite

Electrical and Electro-Thermal Characteristics of (Carbon Black-Graphite)/LLDPE Composites with PTC Effect

Preparation and Electrochemical Characteristics of CoTMPP-TiO2NT/BP Composite Electrocatalyst for Oxygen Reduction Reaction

Pattered Cnt-Based Composite Films For Optoelectronic Applications

Thermally Driven Large N‐Type Voltage Responses from Hybrids of Carbon Nanotubes and Poly(3,4‐ethylenedioxythiophene) with Tetrakis(dimethylamino)ethylene