Abstract:Journal of Thermoplastic Composite Materials, Ahead of Print. Discontinuous-long-fibre (DLF) composites fabricated from pre-impregnated unidirectional (UD) fibre chips are susceptible to structural deficiency. The in-plane highly anisotropic mechanical properties of the chips combined with the random nature of fibre orientation causes local weaknesses within the material when fibres are perpendicular to the load. Recent experimental results have shown that using woven-fibre chips could improve the performance of DLF composites by increasing their average mechanical properties and reducing their variability. To better understand the underlying phenomenon giving an advantage to the woven chips, a finite element model was developed to predict the mechanical properties obtained from a standard tensile test. DLF chips were modelled based on a voxel method where random chip positions were generated by an algorithm developed in this work. ANSYS® software was utilized to model the non-linear response associated with progressive damage of the composite. The maximum stress and the Puck failure criteria were employed to define damage initiation for the woven and UD fibres, respectively. Tensile modulus predictions for both types of chips showed good results when compared to experimental data. Strength predictions for the UD fibres also showed good correlation with experimental results, but the model overestimated the strength of the woven-fibre DLF composite. It appeared that the failure of the UD-fibre composites was associated with matrix failure (transverse tension and in-plane shear). Woven-fibre composites, however, showed damage modes linked to both fibre failure (longitudinal tension) and matrix failure (transverse tension and in-plane shear).

SIMULATION OF COMPRESSIVE FAILURE OF HYBRID PLAIN WOVEN FABRIC LAMINATE WITH A HOLE

Continuum Damage Modeling and Progressive Failure Analysis of Carbon Fiber/epoxy Composite Pressure Vessel

Progressive failure analysis of 2D woven composites at the meso-micro scale

Numerical simulation and experiment validation of variable stiffness composite laminates with open holes under unidirectional tension

Progressive Damage and Failure Modeling in Fiber-Reinforced Laminated Composites Containing a Hole

Progressive Damage Simulation of Scaling Effects on Open-Hole Composite Laminates under Compression

Progressive Damage Simulation of Open-Hole Composite Laminates under Compression Based on Different Failure Criteria

A 3D finite element model to simulate progressive damage in unidirectional- and woven-fibre thermoplastic discontinuous-long-fibre composites

Progressive Failure Simulation for Damaged Composite Laminates Using Nonlinear Finite Element Method

Numerical simulation of compressive residual strength for damaged composite laminates

Finite Element Method of a Progressive Intralaminar and Interlaminar Damage Model for Woven Fibre Laminated Composites under Low Velocity Impact

Progressive fracture analysis of the open-hole composite laminates: experiment and simulation

A Progressive Damage Model For 3d Woven Composites Under Compression

Experimental and Numerical Investigation of Open Hole Carbon Fiber Composite Laminates under Compression with Three Different Stacking Sequences

Multi-scale Progressive Failure Simulation of 3D Woven Composites under Uniaxial Tension

Multiscale Simulation of Damage Progression in 5-Harness Satin Weave Composites

A Multi-Scale Modeling Scheme for Damage Analysis of Composite Structures Based on the High-Fidelity Generalized Method of Cells

An efficient micromechanics-based finite element model for failure analysis of laminated composites

A Failure Mechanism Based Model for Numerical Modeling the Compression-after-impact of Foam-Core Sandwich Panels

Failure Analysis of 3D Woven Composites under Tension Based on Realistic Model

A Micromechanics-Based Damage Model for Compressive Behavior Analysis of Impacted Composite Laminates