Abstract:A high ratio (winding ratio of 1:80) pulse transformer with a modular ferrite core was developed for a repetitive resonant charging system. The magnetic core is constructed from 68 small blocks of ferrites, glued together by epoxy resin. This allows a high degree of freedom in choosing core shape and size. Critical issues related to this modular design are the size tolerance of the individual ferrite blocks, the unavoidable air gap between the blocks, and the saturation of the core. To evaluate the swing of the flux density inside the core during the charging process, an equivalent circuit model was introduced. It was found that when a transformer is used in a resonant charging circuit, the minimal required volume of the magnetic material to keep the core unsaturated depends on the coupling coefficient of the transformer and is independent of the number of turns of the primary winding. Along the flux path, 17 small air gaps are present due to the inevitable joints between the ferrite blocks. The total air gap distance is about 0.67 mm. The primary and secondary windings have 16 turns and 1280 turns, respectively, and the actually obtained ratio is about 1:75.4. A coupling coefficient of 99.6% was obtained. Experimental results are in good agreement with the model, and the modular ferrite core works well. Using this transformer, the high-voltage capacitors can be charged up to more than 70 kV from a low-voltage capacitor with an initial charging voltage of about 965 V. With 26.9 J energy transfer, the increased flux density inside the core was about 0.23 T, and the core remains unsaturated. The energy transfer efficiency from the primary to the secondary was around 92%.

HTS Air-Core Pulse Transformer for Electromagnetic Launch

THE FEASIBILITY RESEARCH OF THE HTS AIR-CORE PULSE TRANSFORMER

Theoretical Analysis and Experiment Research of High Temperature Superconducting Air-Core Transformer

A High-Voltage Pulse Transformer with a Modular Ferrite Core.

Feasibility Research on Improving the Pulsed Current Output of Superconducting Inductor by Using Hts Air-Core Transformer

Design and Test Performance of 2g Pancake Coils for Hts Dc Induction Heater Prototype

Development of a Conduction-Cooled HTS SMES

Electromagnetic Analysis Of An Air-Core Hts Transformer

Design and simulation of a high temperature superconducting pulsed power transformer model for pulsed power supply

A Single Phase Model 9 Kva High-Temperature Superconducting Power Transformer

Study of the Electromagnetic Characteristics of Multiple HTSPPT Modules Based on the Configuration of Toroidal Structure for Inductive Pulsed Power Supply

Optimization Design of a 40-Kj HTSPPT Module for Inductive Pulsed Power Supply

An Optimize Design of HTS Transformer:Multi-Width and Multi-Distance Structure

Inductive Pulsed Power Supply Consisting of Superconducting Pulsed Power Transformers with Marx Generator Methodology

Stepped-shape Field Winding Optimization of a Large Capacity HTS Aircraft Propulsion Machine

Design And Simulation Of Hts Coils With A New Structure For An Inductive Pulsed Power Generator

Thermal analysis of HTS air-core transformer used in voltage compensation type active SFCL

Development of a Three-Phase HTS Power Transformer

Design and Electromagnetic Analysis of Hybrid Megawatt High Temperature Superconducting Transformer

ANALYSIS OF A CONDUCTION-COOLED HTS MAGNET

Design and Analysis of a New HTS Electromagnetic Screw