Abstract:2D and 3D numerical simulations with two-fluid approach were conducted to investigate the gas-liquid flow dynamic behaviour in a rectangle bubble column. In the simulations, k-ε and RNG k-ε turbulent models, which account for the influence of the bubbles on liquid phase turbulence, were employed to study the effect of such models on predication of the dynamic behaviour of the bubble plume. In addition, the influence of different interfacial force closures such as drag, lift and added mass forces were also assessed. The simulation results indicated that for the 2D cases, the use of k-ε model could merely yield a steady flow pattern with one big liquid circulation, while the use of RNG k-ε model could produce a steady flow pattern, characterised by the appearance of three large vortices. However, all the 3D simulations have captured the plume meandering behaviour. The results showed that the value of the turbulence eddy viscosity predicted with 3D simulation was one order smaller than that with 2D simulation. Particularly, the meandering period of the bubble plume predicted by RNG k-ε model, was obviously smaller than that predicted using k-ε model in 3D simulations. The former gave the average turbulence eddy viscosity to be almost one third of that predicted by the latter. The assessment of the use of different interfacial force closures and their combinations showed that the lift force has a pronounced effect on the result of bubbly flow behaviour besides the drag force. It was found that the predicted meandering period was much greater than the experimental observations without the inclusion of the lift force, while the predicted period was consistent with the experimental result when the lift force was considered. Our simulations also revealed that the inclusion of the added mass force could notably improve the prediction results.

Numerical Simulation of Two Phase Turbulent Bubbling Flow Induced by Gas Injecting into Metal Melt

Numerical Simulation of Turbulent Bubbling Flow Induced by Gas Jet into Metal Melt

Numerical Simulation of Turbulent Flow Processes of Gas Jetting into Metal Melt

Experimental and Numerical Simulation on Sequential Three Phase Jet-Loop Reactor

A Dual-Scale Turbulence Model for Gas–liquid Bubbly Flows

Computational Fluid Dynamics Simulation of Bubble Size and Local Gas Holdup in Stirred Vessel

Numerical Modelling of Bubbling Flow Dynamic Behaviour in a Bubble Column

CFD Simulation of Gas-Liquid Flow in Bubble Column

Study on the Numerical Model of Gas-Liquid Dispersion Driven by a Coaxial Mixer

Numerical Simulation of Production Processes of Aluminum Foams Using Air Injection and Melt Stir

Three-dimensional CFD Simulation of Bubble–melt Two-Phase Flow with Air Injecting and Melt Stirring

Numerical Simulation on Gas-liquid Flow in Mechanical-Gas Injection Coupled Stirred System

Numerical Study on Bubble Rising Behavior in A Reciprocally Stirred Molten Metal Flow

Numerical Simulation of Producing Aluminum Foam by Air Injecting and Melt Stirring

3D Numerical Simulation of Gas-assisted Injection Molding

Numerical Simulation Study of Bubble Behavior in Molten Metal Flow Field with Reciprocating Stirring

Numerical Simulation of Production Process of Aluminum Foam by Air Injecting and Melt Stirring

Numerical study on bubble-melt two-phase flows in the production process of aluminum foams

Numerical Simulation of Moving Interfaces in Gas-Assisted Injection Molding Process by Level Set Approach

Numerical Simulation of Single Bubble Motion Behavior in Molten Metal

Numerical Simulation of Melt Filling and Gas Penetration in Gas Assisted Injection Molding