Numerical simulation of a stirring purifying technology for aluminum melt
Bingbing Wan,Weiping Chen,Mengdi Mao,Zhiqiang Fu,Dezhi Zhu
DOI: https://doi.org/10.1016/j.jmatprotec.2017.09.001
IF: 6.3
2018-01-01
Journal of Materials Processing Technology
Abstract:Compared to the traditional Star impeller, the designed impeller (hereinafter termed as the XSR impeller) has the characteristic of pumping which can promote degassing efficiency, and smaller area of the dead region and higher turbulent kinetic energy are obtained within the melt simultaneously. In the range of the discussed immersion depths of impeller (H=185mm, 315mm and 435mm), both too shallow depth (185mm) and too deep depth (435mm) are bad for the distribution of flow field. For the discussed rotational velocities of impeller (V=390rpm, 430rpm, 480rpm and 550rpm), as the V increases, the intensity of fluid flow increases accordingly, and the area of lower turbulent kinetic energy reduces gradually. For the XSR impeller, the optimal immersion depth and rotational velocity are 315mm and 550rpm, respectively. The experimental data are in well accordance with the simulated results. Under the optimal process parameters, the average volume fraction of voids and inclusions of the A356 melt decreases by 98%. The as-cast A356 alloy with higher cleanliness exhibits an ultimate tensile strength (UTS) of 161MPa, a yield strength (YS) of 72MPa and an elongation (EL) of 14%.