Abstract:2D and 3D numerical simulations with two-fluid approach were conducted to investigate the gas-liquid flow dynamic behaviour in a rectangle bubble column. In the simulations, k-ε and RNG k-ε turbulent models, which account for the influence of the bubbles on liquid phase turbulence, were employed to study the effect of such models on predication of the dynamic behaviour of the bubble plume. In addition, the influence of different interfacial force closures such as drag, lift and added mass forces were also assessed. The simulation results indicated that for the 2D cases, the use of k-ε model could merely yield a steady flow pattern with one big liquid circulation, while the use of RNG k-ε model could produce a steady flow pattern, characterised by the appearance of three large vortices. However, all the 3D simulations have captured the plume meandering behaviour. The results showed that the value of the turbulence eddy viscosity predicted with 3D simulation was one order smaller than that with 2D simulation. Particularly, the meandering period of the bubble plume predicted by RNG k-ε model, was obviously smaller than that predicted using k-ε model in 3D simulations. The former gave the average turbulence eddy viscosity to be almost one third of that predicted by the latter. The assessment of the use of different interfacial force closures and their combinations showed that the lift force has a pronounced effect on the result of bubbly flow behaviour besides the drag force. It was found that the predicted meandering period was much greater than the experimental observations without the inclusion of the lift force, while the predicted period was consistent with the experimental result when the lift force was considered. Our simulations also revealed that the inclusion of the added mass force could notably improve the prediction results.

A Dual-Scale Turbulence Model for Gas–liquid Bubbly Flows

New two-scale hydrodynamic model based on energy balance in bubble column

CFD simulation of bubble column with vertical bundle internals

Experimental and Numerical Investigations of Scale-Up Effects on the Hydrodynamics of Slurry Bubble Columns

Numerical Modelling of Bubbling Flow Dynamic Behaviour in a Bubble Column

Modelling of Mass Transfer for Gas-Liquid Two-Phase Flow in Bubble Column Reactor with a Bubble Breakage Model Considering Bubble-Induced Turbulence

Study on the Numerical Model of Gas-Liquid Dispersion Driven by a Coaxial Mixer

CFD Simulation of Gas-Liquid Flow in Bubble Column

A Modified Bubble Breakage and Coalescence Model Accounting the Effect of Bubble-Induced Turbulence for CFD-PBM Modelling of Bubble Column Bubbly Flows

CFD Simulation of Gas-Liquid Flow in Bubble Column with Two-bubble Phase Population Balance Model

New Turbulence Model for Gas-Liquid Two-Phase Bubbly Flow

An Improved Computational Fluid Dynamics-Discrete Bubble Model for Multiphase Bubble Flow Simulation with a Wide Grid/bubble Size Ratio

Multi-fluid Model for Laminar Bubbly Flow in a Vertical Pipe

A k-ε turbulence model for bubbly two phase flow and prediction of liquid velocity and turbulent kinetic energy distribution

NUMERICAL INVESTIGATION ON TURBULENCE MODELS IN BUBBLY FLOW USING EULER-LAGRANGE APPROACH

Modeling of Bubbly Flow using a Combined Volume of Fluid and Discrete Bubble Model: Investigation on Interphase Forces

Investigation on Bubble Diameter Distribution in Upward Flow by the Two-Fluid and Multi-Fluid Models

Developed 'laminar' Bubbly Flow with Non-Uniform Bubble Sizes

A New Transient Model of Multi-Scale Bubble Migration and Evolution During Gas-Liquid Flow in Pipelines

Extended two-fluid model applied to analysis of bubbly flow in multiphase rotodynamic pump impeller

Numerical Simulation of Gas and Liquid Two-Phase Flow in Gas-Stirred Systems Based on Euler–Euler Approach