Abstract:A detailed numerical investigation was conducted to explore various flow-control strategies for restraining the serious laminar separation which commonly occurs on the LPT blades when operating under low Reynolds number conditions. The simulations were carried out at a Reynolds number of 25,000 with a free-stream turbulence intensity of 0.01. A novel approach of oscillatory blowing using fluidic oscillators (FOs) was developed to manage the separation. Steady and pulsed bowing were also investigated. The results show remarkable reductions in losses, with decreases of 45.7%, 36.1% and 50.7% achieved through oscillatory blowing, steady blowing and pulsed blowing, respectively. Particularly, the laminar separation was suppressed more significantly when emolying oscillatory and pulsed blowing under conditions of low blowing ratios. This is mainly attributed to the pronounced unsteadiness induced by the unsteady blowing method. A comprehensive analysis of flow control efficiency demonstrated that unsteady blowing delivered an energy gain exceeding 20 times the power cost of flow control, whereas only 72 percent of injection costs were recovered at the test plane with steady blowing. As the blowing ratio increases, the control advantages offered by unsteady control diminish, and the effects of steady and unsteady blowing tend to be consistent. Notably, the fluidic oscillator-based actuator has the ability to induce pulsations in the boundary layer without any moving parts, thus eliminating reliability concerns and making it an attractive choice for adoption in practical turbomachinery manufacturing. This research holds significant importance in the development of more advanced and reliable active blowing techniques.

Experimental Investigation of Active Control of Flow Separation at Low-pressure Turbine Cascade

Les and Cdns Investigation of T106c Low Pressure Turbine

Roughness Effects on Flow Losses of a High-Lift Low-Pressure Turbine Cascade

PIV investigation on corner separation control in a compressor cascade based on a vortex generator

Separation Control Using Synthetic Vortex Generator Jets in Axial Compressor Cascade

Study of Separation Control of Vortex Generators on Transonic Wings

Control of Vortex Shedding from Two Side-by-side Cylinders Using a Pair of Tangential Jets

Unsteady Flow Control of a Plane Diffuser Based on a Karman-vortex Generator

Research on the Effect of Vortex Generators on Controlling Flow Separation of Hydrofoil

Study of Control Effects of Vortex Generators on a Supercritical Wing

Investigation of Practical Flow Control Methodologies with RANS/LES Hybrid Methods

Study On Vortex Generators For Control Of Attached Cavitation

Large-Eddy Simulation of Flow Separation Control in Low-Speed Diffuser Cascade with Splitter Blades

Flow Control of Annular Compressor Cascade by Synthetic Jets

Control of flow separation over a circular cylinder using synthetic jet

Control of Unsteady Separated Flows Inside Axial Compressors by Synthetic Jets

Numerical study of passive and active flow separation control over a NACA0012 airfoil

Numerical Investigation of Boundary Layer Separation Control on the Low-Pressure Turbine Blade by Oscillatory Blowing

Separation flow control and engineering application of synthetic jets in compressor

Study of the streamwise location of a micro vortex generator for a separation-control mechanism in supersonic flow

Flow Separation Control in a Conical Diffuser with a Karman-vortex Generator