Experimental study on multi-angle pulsed jet actuators for controlling corner separation flow in a compressor cascade
Huawei Lu,Chengze Wang,Xiaozhi Kong,Shiqi Wang,Jianchi Xin,Shuang Guo
DOI: https://doi.org/10.1016/j.ast.2024.109135
IF: 5.457
2024-04-15
Aerospace Science and Technology
Abstract:Three-dimensional corner separation caused by the aerodynamic design of high-load compressor cascades is the main factor that limits their performance enhancement. Because of the unsteady characteristics of large-scale flow separation, injecting unsteady jets into the flow field has become a new flow control method. In this study, the essential flow characteristics of a compressor cascade were obtained through numerical simulations. Subsequently, the effect of pulsed jet angle on the aerodynamic performance of the cascade was experimentally investigated under different operating conditions using pulsed jet actuators. The results showed that at the design incidence angle of 0° and near-stall incidence angle of +4°, the starting point of the corner separation is located at 21% and 9% of the axial blade chord, respectively. The pulsation frequency downstream of the cascade trailing edge is 1454.5 Hz. Under the design conditions, the 20° pulsed jet exhibits the best control effect, reducing the total pressure loss coefficient by 13.4% compared with that of the original cascade. Moreover, pulsed jets demonstrate strong applicability under variable operating conditions. At near-stall incidence angles, when the jet angle is 30°, the loss-reduction ability of the pulsed jet is maximized, decreasing the loss by 25.2%. Pulsed jets reduce the cascade loss primarily by suppressing the secondary flow at the endwall and discretizing the vortex structures in the channel.
engineering, aerospace