Flow Separation Control in a Conical Diffuser with a Karman-vortex Generator

Jinwen Yang,Yufei Zhang,Haixin Chen,Song Fu

DOI: https://doi.org/10.1016/j.ast.2020.106076

IF: 5.457

2020-01-01

Aerospace Science and Technology

Abstract:As a novel passive flow control device, a ring-shaped Karman-vortex generator (KVG) is employed to alleviate the severe flow separation of a conical diffuser with a total divergence angle of 36∘ at a Re=1.0×104. The baseline diffuser and 18 controlled schemes with different KVG sizes and location combinations are studied by an implicit large-eddy simulation method. The flow control mechanisms and design principles are discussed based on current simulations and relevant researches. The diameter of the KVG DK is suggested to be 3–4% of the length of the expansion section. The length to the throat and the distance from the wall are suggested to be 7.5–10.0DK and 2.0–3.0DK, respectively. For the optimal combinations, the alternately shedding Karman vortex street is seldom affected by the wall, and the unsteady wake can directly arrive downstream at the near-wall region and effectively enhance the flow mixing. The results demonstrate that a properly designed KVG can suppress massive flow separation in the expansion section and downstream region and promote pressure recovery performance.