Abstract:Drag reduction through turbulent boundary layer control (TBLC) is an essential way to develop green aviation technologies. Compared with traditional approaches for drag reduction, turbulence drag reduction is a relatively new technology, particularly for skin friction drag reduction, and it is becoming a hotspot problem worldwide. This paper focuses on the research of micro fluidic-jet actuators used for outer-layer boundary layer control with high-performance computing (HPC). This study aims to reduce turbulent drag by reshaping the flow structure within the turbulent boundary layer. To ensure the calculation accuracy of the core region and reduce the consumption of computing resources, a zonal LES/RANS strategy and WMLES method are proposed to simulate the effects of fluidic-actuators for outer-layer boundary control, in which high-performance computing has to be involved. The studies are performed on the classical zero-gradient turbulent flat plate cases, in which three different control strategies named “W-control,” “V-control,” and “VW-control” are used and compared to study the effects of drag reduction under a low Reynolds number at Re τ = 470 and a higher Reynolds number at Re τ = 4700. The mechanism for drag reduction is analysed via a pre-multiplied spectral method and a parallel dynamic mode decomposition (DMD) method. The results show that the present approach can effectively simulate the outer-layer turbulent boundary control where the “V-control” with the fluidic-jet actuator array behaves well to achieve an average drag reduction (DR) rate of more than 5% for the high Reynolds number case of the flat plate boundary layer. The high Reynolds shear stress and turbulent kinetic energy distribution in the boundary layer region show an obvious uplift under the effects of actuators, which is the main mechanism for drag reduction.

Investigation of Practical Flow Control Methodologies with RANS/LES Hybrid Methods

A Review of Flow Control Strategies for Supersonic/Hypersonic Fluid Dynamics

Study of Control Effects of Vortex Generators on a Supercritical Wing

Study of Separation Control of Vortex Generators on Transonic Wings

Investigation of Flow Control Methods for Reducing Heat Flux on a V-shaped Blunt Leading Edge under Real Gas Effects

Numerical Simulation for Effects of Mach and Reynolds Number on Flow over Medium Radius Leading Edge Delta Wing

Numerical Simulation about the Effects of Flow Control for Increasing Lift and Decreasing Drag

Numerical study of passive and active flow separation control over a NACA0012 airfoil

Investigation on the adaptive control of shock wave/turbulent boundary layer interaction based on the secondary circulation jets

An Useful Viscous Flow Solver for Control Surface Deflection Using Unstructured Mixed Element Grids

Numerical Investigations of Outer-Layer Turbulent Boundary Layer Control for Drag Reduction Through Micro Fluidic-Jet Actuators

Control Mechanism of Micro Vortex Generator and Secondary Recirculation Jet Combination in the Shock Wave/boundary Layer Interaction

Experimental and Numerical Study on Flow Separation Control in Rectangle Diffuser

Experimental Investigation of Active Control of Flow Separation at Low-pressure Turbine Cascade

Numerical Analysis Of Active Flow Control Around Airfoil By Synthetic Jet Technology In Low Reynolds Number

A flow separation control on cylinder flow

Study of Transonic Separated Flows with zonal-DES Based on Weakly Non-linear Turbulence Model

Influences of microjet pressure and number of microjets on the control of shock wave/boundary layer interaction

Estimation and Analysis of Hybrid Laminar Flow Control on a Transonic Experiment

Experimental Investigation on the Leading edge Vortex Breakdown and Their Control for Flow over a 60°Delta Wing

Design Exploration on the Shock Wave/turbulence Boundary Layer Control Induced by the Secondary Recirculation Jet