Abstract:In order to meet these requirements of long lifetime, reliability in a wide voltage range, small delay time, as well as small delay jitter, the triggered devices based on semiconductor ZnO and high dielectric BaTiO3 ceramic surface flashover devices were designed, their characteristics were investigated. The experimental results indicate that the trigger device made from high dielectric BaTiO3 ceramic show excellent performances of emitted pulse charge and fast released charge ability. Within the pressure of PSS(pseudospark switch) operating, the emitted charge is up to 20 ～30 μC within tens nanosecond, and the number of electron is up to 1.25×1014～1.875×1014 and the current released rate reaches 120～320 GA/s, these make PSS have small delay time and delay jitter. For the PSS with the dielectric material of semiconductor ZnO and high dielectric BaTiO3 ceramic trigger devices, when the gas pressure is 7 Pa, the hold-off voltage of PSS is 28 kV, the minimum trigger switch voltage is 360 V and 130 V, the trigger operating voltage scope is 1.3%～99% and 0.46%～99%, the maximum discharging delay time is 380 ns and 80 ns, and the maximum delay jitter 85 ns and 22 ns. The minimum discharging delay time is 106 ns and 35ns, and the minimum delay jitter is 23 ns and 6 ns ,respectively. The experimental results indicate that the trigger device made from high dielectric BaTiO3 ceramic show excellent performance of emitted pulse charge and fast released charge ability, the PSS made by this trigger device has very low discharging delay and delay jitter.

Experimental Investigations on Trigger Characteristics of Pseudospark Switch Based on Surface Flashover Technology

Investigation of Triggered Pseudospark Switch Based on Surface Flashover

Experimental Investigation of Surface Flashover Trigger Device for Low-pressure Discharging Switch

Long Lifetime, Triggered, Spark-Gap Switch For Repetitive Pulsed Power Applications

BaTiO3 Dielectric Surface Flashover Triggering Device of Pseudospark Switch

Experimental Research of ZnO Surface Flashover Trigger Device of Pseudo-Spark Switch

A Triggered Spark-Gap Switch for High-Repetition Rate High-Voltage Pulse Generation

Design and Performance Analysis of Multi-gap Multi-channel Spark Switch with LCR Triggered Method

Multiple-Gap Spark Gap Switch

Surface Flashover Triggering of Pseudospark Switchers

Experimental Study of Electron Emission Characteristics of a Surface Flashover Trigger in a Low Pressure Environment

Experimental Study on Triggering Characteristics of a Surface Flashover Triggered Vacuum Switch

A Low-Jitter Self-Triggered Spark-Discharge Pre-Ionization Switch: Primary Research on Its Breakdown Characteristics and Working Mechanisms

Improving Triggering Characteristics for A Surface-Flashover Triggered Vacuum Switch

Influence of Trigger Pulse on the Trigger Characteristics of Surface Flashover Trigger Vacuum Switch

Research on Trigger Characteristics of Electrically Surface Flashover Triggered Vacuum Switch with Different Trigger Electrode Materials

Delay Characteristics of Triggered Vacuum Switch and Air Spark Gap for Pulsed Power Applications

Design, Simulation, and Characterization of a Low-Cost In-Plane Spark Gap Microswitch with Dual-Trigger Electrode for Pulsed Power Applications.

Experimental Study of the Laser-Triggered Discharge for the Application in a Gap Switch

Electron Emission Characteristics of Batio3 Surface Flashover Trigger Device of Pseudospark Switch

Trigger Characteristics of Two-Electrode Graphite Spark Gap Switches in Pulsed Power Conditioning System