Abstract:Pulsed power systems can deliver high peak power in a micro/nano-second timescale to various loads in scientific and industrial applications, whose performances are significantly influenced by the pulsed discharge switch. This article presents the development and comprehensive tests of a miniaturized sealed-off pseudospark switch. The structure of double-gap and multi-channel is adopted to achieve the high hold-off voltage and high current capacity. In single pulse tests, the influence of pressure in the switch is analyzed. As the pressure increases, values of multiple parameters decrease, like self-breakdown voltage, trigger delay, and voltage dropping time. In a wide pressure range, trigger jitter is below 3 ns, and the minimum is <1 ns. At low pressure, the transient voltage across two gaps becomes inconsistent, and two types of current quenching are observed, which are related to processes occurring on cathode surface. In repetitive pulse tests, the direct repetitive operation is up to 3.5 kHz while higher repetition rate is limited by the trigger system. In double-pulse tests, the maximum repetition rate can be higher than 8 kHz for 40 kV pulsed voltage. Meanwhile, the insulation recovery speed is higher at lower pressure, and as the time delay between two pulses increases, the second pulse breakdown voltage increases nonlinearly. In high current tests, the switch is also used in metal wire explosion experiments and operates at the condition of 30 kV/40 kA for more than 104 shots without performance degradation. Further lifetime tests point out that the switch can work for >106 shots stably at moderate current. Experiments prove that the designed switch has superior performances including high hold-off voltage (>50 kV), low jitter (<1 ns), high repetition rate (>3.5 kHz), high peak current (>40 kA), long lifetime (>106 shots) and miniaturized size.

Surface Flashover Triggering of Pseudospark Switchers

Experimental Research of ZnO Surface Flashover Trigger Device of Pseudo-Spark Switch

A Triggered Spark-Gap Switch for High-Repetition Rate High-Voltage Pulse Generation

Design and Performance Analysis of Multi-gap Multi-channel Spark Switch with LCR Triggered Method

Long Lifetime, Triggered, Spark-Gap Switch For Repetitive Pulsed Power Applications

Research on the trigger process of surface flashover triggered vacuum switch

Multiple-Gap Spark Gap Switch

A Low-Jitter Self-Triggered Spark-Discharge Pre-Ionization Switch: Primary Research on Its Breakdown Characteristics and Working Mechanisms

Closing mechanism of electrically-triggered vacuum surface flashover switch

Influence of Trigger Pulse on the Trigger Characteristics of Surface Flashover Trigger Vacuum Switch

Surface Microcosmic Phenomena Induced by Pulsed Flashovers

High repetition rate, fast current rise, pseudo-spark switch

A Three-Electrode Gas Switch Triggered by Microhollow Cathode Discharge with Low Trigger Voltage

Using Self-Triggered Sustaining Pre-Ionization to Obtain Nanosecond Jitter in a MV Pulsed Gas Switch

Optical Diagnosis of Preionization Mechanisms and Breakdown Characteristics in a Nanosecond Switch

A novel low-jitter plasma-jet triggered gas switch operated at a low working coefficient

A Miniaturized Sealed-Off Double-Gap Pseudospark Switch for High Power and High Repetition Rate Pulsed Discharge Applications

Surface flashover in 50 years: Theoretical models and competing mechanisms

The effect of intermediate electrode on pseudo-spark switch performance with high repetition rate

A compact solid-state high repetition rate trigger based on a spiral generator

A Gas Switch Triggered by a Microhollow Cathode Discharge (MHCD) Array with Lower Trigger Energy