Abstract:This paper presents a novel charge pump scheme that combines the advantages of Fibonacci and Dickson charge pumps to obtain 30 V voltage for display driver integrated circuit application. This design only requires four external capacitors, which is suitable for a small-package application, such as smart card displays. High-amplitude (<6.6 V) clocks are produced to enhance the gate drive of a Dickson charge pump and improve the system’s current drivability by using a voltage-doubler charge pump with a pulse skip regulator. This regulation engages many middle-voltage devices, and approximately 30% of chip size is saved. Further optimization of flying capacitors tends to decrease the total chip size by 2.1%. A precise and simple model for a one-stage Fibonacci charge pump with current load is also proposed for further efficiency optimization. In a practical design, its voltage error is within 0.12% for 1 mA of current load, and it maintains a 2.83% error even for 10 mA of current load. This charge pump is fabricated through a 0.11 μm 1.5 V/6 V/32 V process, and two regulators, namely, a pulse skip one and a linear one, are operated to maintain the output of the charge pump at 30 V. The performances of the two regulators in terms of ripple, efficiency, line regulation, and load regulation are investigated.

A New Charge Pump with High Voltage Gain for Low Supply Environment

A regulated charge pump with wide current driving capability for low-voltage applications

Design of Charge Pump for High-Speed Phase-Locked Loop

A New Type of Charge-Pump Circuit for Low-Voltage High-Speed PLL Application

Fully Integrated High-Voltage Level Shifts and Drivers for Buck Converters.

A Perfectly Current Matched Charge Pump with Wide Dynamic Range for Ultra Low Voltage Applications

An Improved Charge Pump with High Efficiency for Low Voltage Operations

High Efficiency Charge Pump Without Threshold-Voltage Drop

A High Swing Charge Pump with Current Mismatch Reduction for PLL Applications

A High Efficiency CMOS Charge Pump for Low Voltage Operation

Two New Charge Pumps with Improved Reliablity

Dynamic Analysis of Charge Pump Circuit

A High-Performance Charge Pump with Improved Static and Dynamic Matching Characteristic.

A High Efficiency ALL-PMOS Charge Pump for Low-Voltage Operations

A Step-Up Charge Pump with High Integration and Full-Coverage Voltage Conversion Ratio

Research and Design of an On-Chip High Efficiency Dual-Output Charge Pump

An Efficient, Wide-Output, High-Voltage Charge Pump With a Stage Selection Circuit Realized in a Low-Voltage CMOS Process

An Efficient Step-up and Step-down Dual-output Charge Pump Controlled by Finite State Machine

A High-Efficient, Multi-Phase Charge Pump Scheme

An Efficient Nonlinear Charge Pump Cell For Lcd Driver

Dickson Charge Pump with Gate Drive Enhancement and Area Saving