Abstract:Utilization of additive manufacturing (AM) is widespread in many industries due to its unique capabilities. These material extrusion methods have been developed extensively for manufacturing polymer and polymer composite materials. The raw material in filament form are liquefied in the liquefier section and are consequently extruded and deposited onto the bed platform. The designed parts are manufactured layer by layer. Therefore, there is a gradient of temperature due to the existence of the cyclic reheating related to each deposited layer by the newer deposited ones. Thus, the stated temperature evolution will have a significant role on the rheological behavior of the materials during this manufacturing process. Furthermore, each processing parameter can affect this cyclic temperature profile. In this study, different processing parameters concerning the manufacturing process of polymer and polymer composite samples have been evaluated according to their cyclic temperature profiles. In addition, the manufactured parts by the additive manufacturing process (the extrusion method) can behave differences compared to the manufactured parts by conventional methods. Accordingly, we attempted to experimentally investigate the rheological behavior of the manufactured parts after the manufacturing process. Thus the three-point bending fatigue and the tensile behavior of the manufactured samples were studied. Accordingly, the effect of the reinforcement existence and its direction and density on the tensile behavior of the manufactured samples were studied. Therefore, this study is helpful for manufacturers and designers to understand the behaviors of the materials during the FFF process and subsequently the behaviors of the manufactured parts as a function of the different processing parameters.

The Adhesive Mechanism and Thermal Analysis of Fibers in the FDM Process

Interfacial Bonding During Multi-Material Fused Deposition Modeling (FDM) Process Due to Inter-Molecular Diffusion

Modeling of Bond Formation Between Polymer Filaments in the Fused Deposition Modeling Process

Evolution of microstructure and thermo‐mechanical attributes of fiber reinforced polyamide during fused deposition modeling 3D printing: A comprehensive characterization study

Thermal analysis of fused deposition modeling process based finite element method: Simulation and parametric study

Single-layer Temperature-Adjusting Transition Method to Improve the Bond Strength of 3D-Printed PCL/PLA Parts

Heat Transfer and Adhesion Study for the FFF Additive Manufacturing Process

Insights into Temperature Simulation and Validation of Fused Deposition Modeling Processes

In-Situ Temperature Monitoring of ABS During Fused Filament Fabrication (FFF) Process With Varying Process Parameters

Analysis of Thermal Behavior in 3D Printing of Continuous Fiber Reinforced Polymer Composites

Temperature-compensated Constitutive Model of Fused Filament Fabrication 3D Printed PLA Materials with Full Extrusion Temperatures

Effects of Fused Deposition Modeling Process Parameters on Tensile, Dynamic Mechanical Properties of 3D Printed Polylactic Acid Materials

Temperature Analyses in Fused Filament Fabrication: From Filament Entering the Hot-End to the Printed Parts

Improving the Impact Strength and Heat Resistance of 3D Printed Models: Structure, Property, and Processing Correlationships during Fused Deposition Modeling (FDM) of Poly(Lactic Acid)

Study of Processing Parameters in Fused Deposition Modeling Based on Mechanical Properties of Acrylonitrile‐butadiene‐styrene Filament

The Influence of Moisture Absorption and Desorption by the ABS Filament on the Properties of Additively Manufactured Parts Using the Fused Deposition Modeling Method

Flowing of External Melt from the Nozzle in the Forming Process of FDM

Thermal, Tensile and Fatigue Behaviors of the PA6, Short Carbon Fiber-Reinforced PA6, and Continuous Glass Fiber-Reinforced PA6 Materials in Fused Filament Fabrication (FFF)

Thermal history based prediction of interlayer bond strength in parts manufactured by material extrusion additive manufacturing

Modelling the Melting Kinetics of Polyetheretherketone Depending on Thermal History: Application to Additive Manufacturing

Exit morphology and mechanical property of FDM printed PLA: influence of hot melt extrusion process