Abstract:This work proposes a simulation-based multi objective optimization model for the operation of the product separation process in a methanol to propylene (MTP) plant, striving to enhance the system energy utilization efficiency. The formation of byproducts including an oxygenated hydrocarbon, dimethyl ether (DME), makes the product refining process highly energy-intensive, not only because that the various hydrocarbon byproducts require a long train of distillation columns but also owing to the fact that DME forms azeotrope with product propylene. Furthermore, the formation of oxygenated DME byproduct varies with the catalyst activity, which makes the system more complex. The contribution of this paper is 2-fold. First, it proposes a novel way of DME removal with responsive consumption of extractant methanol according to the DME concentration during one production period. In this way, the energy consumption of the condenser and reboiler of the methanol recovery unit can be expected to decrease by 61.5% and 37.6%, respectively. Second, a simulation-based multiobjective optimizaton framework is introduced to minimize the total heating and cooling costs and maximize the product purity, by integrating a rigorous process simulation model with an intelligent optimization algorithm. Given the characteristics of the MTP production process, three different operation scenarios, namely, the start of run, the designed operation condition, and the end of run, which correspond to different DME concentrations in the system, are covered. The approach is illustrated by its application to a real MTP plant, in which numerical results indicate that the proposed method is capable of identifying appealing operation options, and it can be utilized to support decision-making of the product separation of MTP plants.

Simulation of bimodal polyethylene products by operation parameters oscillation

Simulation of Bimodal Polyethylene Production by Oscillating Operation of Hydrogen

Modeling of Molecular Weight and Copolymer Composition Distributions for Ethylene‐propylene Solution Copolymerization

Investigation of a Dynamic Operation Mode of Ethylene Polymerization Process with a Liquid-Containing Fluidized Bed

Bimodal Polyethylene Produced by Oscillating Operation of Hydrogen in Single Gas-Phase Polymerization Reactor

Customization of Particle Size Distribution in Continuous Polymerization Process

Stability and dynamic behaviors of gas-phase ethylene polymerization process under condensed mode operation

Study on Optimal Strategy of Grade Transition in Industrial Fluidized Bed Gas-Phase Polyethylene Production Process

Important Mesoscale Phenomena in Gas Phase Fluidized Bed Ethylene Polymerization

Advanced Catalyst Technology for Broad/Bimodal Polyethylene, Achieved by Polymer-Coated Particles Supporting Hybrid Catalyst

Minimum fluidization velocity of bimodal polyethylene particles

Liquid Containing Particle Polymerization: Ethylene/-Olefin Reaction in a New Environment

OPTIMAL GRADE TRANSITION IN CONTINUOUS POLYMERIZATION PROCESS

Simulation And Optimization Of The Molecular Weight Distribution In A Non-Ideal Polymerization Reactor

Optimization of grade transition for high-density polyethylene continuous slurry process

Simulation on relative molecular mass distribution of LDPE tubular reactor

Mixing Effects on the Gas Flow and Mass Transfer in a Vertical Single Helical Ribbon Agitated Reactor for Propylene Polymerization

Control of Diffusion/Barrier Effects of Polymer-Coated Particles and the Strengthening of Ethylene Polymerization Reactor

Simulation-Based Multiobjective Optimization Of The Product Separation Process Within An Mtp Plant

Modeling of the Molecular Weight Distribution and Short Chain Branching Distribution of Linear Low-Density Polyethylene from a Pilot Scale Gas Phase Polymerization Process

Equation-oriented optimization on an industrial high-density polyethylene slurry process with target molecular weight distribution