Abstract:Methanol to olefins (MTO) is a new technology of modern coal-to-chemicals industry. The catalyst performance and selectivity of light olefin in the MTO process can be remarkably improved by well-designed reactor operating mode. The simulation of MTO reaction in a single, two and three fluidized-bed connected in series was carried out by using the reaction and deactivation kinetics experimentally obtained on the commercial SAPO-34 catalyst, combined with fluidized-bed dynamic two-phase model and particle residence time model. The effects of catalyst residence time, gas-solid cocurrent and countercurrent flow on the MTO performance were investigated. The simulation results show that the catalyst coke content and selectivity of the light olefin depend on the catalyst residence time. The multi-bed in series operating mode will reduce the particle back-mixing, which results in a more uniform coke distribution and a longer catalyst lifetime. For the gas-solid countercurrent flow of two reactors in series, the second reactor is used to pre-coke the catalysts before entering into the first reactor and therefore the light olefin selectivity and the total coke content are increased. The catalyst production capacity of one pass is increased by 24.4% compared with that of single reactor mode. Three reactors connected in series mode can fully utilize the different functions of each reactor for pre-coking, MTO reaction and post-coking, bring about a 1% increase in the selectivity of the light olefin and a 31.1% increase in the catalyst production capacity when compared with the single reactor.

Simulation of Bimodal Polyethylene Production by Oscillating Operation of Hydrogen

Simulation of bimodal polyethylene products by operation parameters oscillation

Bimodal Polyethylene Produced by Oscillating Operation of Hydrogen in Single Gas-Phase Polymerization Reactor

Simulation of Fluidized Bed Reactor for Methanol to Olefins(MTO)Process

Simulation of multi-fluidized-bed in series for methanol to olefins

Advanced Catalyst Technology for Broad/Bimodal Polyethylene, Achieved by Polymer-Coated Particles Supporting Hybrid Catalyst

Synthesis of Bimodal Polyethylene Using Ziegler-Natta Catalysts by Multiple H2 Concentration Switching in a Single Slurry Reactor

Ethylene polymerization with metallocene/late transition metal combined catalysts

Simulation on relative molecular mass distribution of LDPE tubular reactor

Experimental Investigation on Mechanisms of Fine Particles Generation for the Borealis Borstar Multistage Olefin Polymerization Process

Blending Properties of Polyethylene Blends Obtained by Hybrid Catalyst on Composite Support

Synthesis of Polyethylene with Bimodal Molecular Weight Distribution by Supported Iron‐based Catalyst

Synthesis of Molecular Weight Controllable Bimodal Polyethylene from Fluorinated FI–Ti Catalyst Coupled with ZnEt2

Stability and dynamic behaviors of gas-phase ethylene polymerization process under condensed mode operation

OPTIMAL GRADE TRANSITION IN CONTINUOUS POLYMERIZATION PROCESS

Investigation of a Dynamic Operation Mode of Ethylene Polymerization Process with a Liquid-Containing Fluidized Bed

A comparative Monte Carlo simulation of HDPE synthesis with bimodal molecular weight distribution: evaluating slurry and solution processes using dual-site metallocene catalyst

Catalytic Hydrogenolysis of Plastic to Liquid Hydrocarbons over a Nickel-Based Catalyst

Simulation And Optimization Of The Molecular Weight Distribution In A Non-Ideal Polymerization Reactor

Polyethylene Hydrogenolysis over Bimetallic Catalyst with Suppression of Methane Formation

Solvent-free preparation of well-dispersed and highly active CrOx/VOx/TiO2-SiO2 bimetallic catalyst for bimodal UHMWPE/ HDPE in-reactor blends