Abstract:Heterogeneous Ziegler–Natta and homogeneous metallocene catalysts are known to produce ultrahigh molecular weight polyethylene (UHMWPE) in the entangled state. On the other hand, only (two) homogeneous single-site catalysts are reported to yield disentangled UHMWPE (dis-UHMWPE). This disparity between the two types of catalysts and the two states of polyethylene can be bridged if a heterogeneous single-site catalyst that can yield dis-UHMWPE is made accessible. Here, one-pot two-step synthesis of a MgCl2 supported [Ti(OEt)4] derived catalyst 1 with a two-stage activation strategy is reported to produce dis-UHMWPE. Second activation of catalyst 1 was performed by adding excess modified methylaluminoxane (MMAO12), and XPS analysis indicated that the catalyst existed in only Ti(III) state at [Al]/[Ti] ratio of 600. Catalyst 1 after second activation with MMAO12 was found to be highly active in ethylene polymerization and produced dis-UHMWPE. Polymerization conditions were tailored to obtain molecular weight (M w) as high as 13 million g/mol PE. To the best of our knowledge, this is the first time a heterogeneous catalyst (catalyst 1) that displays pseudosingle site nature is able to produce dis-UHMWPE. The thus-prepared nascent polyethylene revealed a melting temperature of 141–144 °C, which is a characteristic melting transition for a dis-UHMWPE. The disentangled state of the nascent PE and its M w and MWD were further authenticated by rheological investigations. Isothermal time sweep oscillatory experiments in linear viscoelastic limit revealed a rapid rise in elastic modulus followed by equilibration to plateau modulus, which are characteristic features of the disentangled state. Thus, a pseudo-single-site heterogeneous catalyst has been accessed, which upon second activation with excess MMAO12 led to the production of dis-UHMWPE.

Synthesis of Bimodal Polyethylene Using Ziegler-Natta Catalysts by Multiple H2 Concentration Switching in a Single Slurry Reactor

Advanced Catalyst Technology for Broad/Bimodal Polyethylene, Achieved by Polymer-Coated Particles Supporting Hybrid Catalyst

Simulation of Bimodal Polyethylene Production by Oscillating Operation of Hydrogen

Synthesis of Molecular Weight Controllable Bimodal Polyethylene from Fluorinated FI–Ti Catalyst Coupled with ZnEt2

Ethylene polymerization with metallocene/late transition metal combined catalysts

Control of Diffusion/Barrier Effects of Polymer-Coated Particles and the Strengthening of Ethylene Polymerization Reactor

UHMWPE with Short‐chain Branches Synthesized by Alkenyl Substituted Phenoxy–imine Catalysts in Ethylene Polymerization

Synthesis of Polyethylene with Bimodal Molecular Weight Distribution by Supported Iron‐based Catalyst

Facile Preparation of Bimodal Polyethylene with Tunable Molecular Weight Distribution from Ethylene Polymerization Catalyzed by Binary Catalytic System in the Presence of Diethyl Zinc

Effect of Catalysts Supporting on Tandem Polymerization of Ethylene Stock in Synthesis of Ethylene-1-Hexene Copolymer

Blending Properties of Polyethylene Blends Obtained by Hybrid Catalyst on Composite Support

PREPARATION OF ULTRA HIGH MOLECULAR WEIGHT POLYETHYLENE USING STRUCTURED NANOPARTICAL ZIEGLER-NATTA CATALYSTS

Bimodal Polyethylene Produced by Oscillating Operation of Hydrogen in Single Gas-Phase Polymerization Reactor

Ethylene Polymerization with Hybrid Nickel Diimine/cp2ticl2 Catalyst: a New Method to Prepare Blends of Linear and Branched Polyethylene

A co-anchoring strategy for the synthesis of polar bimodal polyethylene

Combination of 8‐aminoquinoline Nickel Dichloride and Cp2ZrCl2 Catalysts for Ethylene Polymerization

Exploring bimodal HDPE synthesis using single- and dual-site metallocene catalysts: a comprehensive review of the Monte Carlo method and AI-based approaches

Judicious Reduction of Supported Ti Catalyst Enables Access to Disentangled Ultrahigh Molecular Weight Polyethylene

A comparative Monte Carlo simulation of HDPE synthesis with bimodal molecular weight distribution: evaluating slurry and solution processes using dual-site metallocene catalyst

Synthesis of PP with broad molecular weight distribution by multiple adding-withdrawing H_2 during polymerization process

Bimodal/Broad Polyethylene Prepared in A Disentangled State