Abstract:High-performance ultrahigh-molecular-weight polyethylene (UHMWPE)/low-molecular-weight polyethylene (PE) mixture additives were proven to be effective for enhancing commercial high-density polyethylene (HDPE) resins, which were synthesized by the complicated dual-site immobilized catalyst system. In this paper, PE wax components were preadded in the polymerization reactor for in situ synthesizing the UHMWPE/PE wax binary blends with just a single SiO2/MgCl2 supported Z-N catalyst modified by the active site isolators. The influence of PE wax addition on the catalytic activity, molecular weight, thermodynamic property, particle size, and entanglement density was systematically researched. It was evidenced that the catalytic activity and molecular weight exhibit a linear relationship with the ethylene solubility caused by the PE wax addition. Besides, the competition between chain propagation/crystallization balance and PE wax long chains entanglement effect arising from the PE wax addition leads to the minimum entanglement density (G(N)(t) = 0.59) of UHPE-20%. The disbalance of chain propagation rate and chain crystallization rate can be broken by PE particle fragmentation, inducing rapidly increased entanglements. Furthermore, with the synergistic disentanglement influence of reduced entanglements for UHMWPE and the chain diffusion ability for PE wax, the LU-30 sample with a mixture of UHPE-30% and linear low-density polyethylene (LLDPE) exhibits the optimum strength/stiffness/toughness properties. The tensile strength, Young's modulus, and impact strength of LU-30 reach 18.2 MPa (+4%), 172.1 MPa (+53.8%), 60.5 kJ/m(2) (+13.1%), respectively, compared with those of pure LLDPE. The overall enhanced mechanical properties are attributed to the intensive signal intensity and tightly stacked form of shish-kebab structures, which were verified by the two-dimensional small angle X-ray scattering and two-dimensional wide angle X-ray diffraction patterns. In addition, the in situ polymerization method of UHMWPE/PE wax with SiO2/MgCl2 supported Z-N catalysts exhibits a great probability of efficient utilization of low-molecular-weight polyethylene by-products (PE wax).

Bimodal/Broad Polyethylene Prepared in A Disentangled State

Advanced Catalyst Technology for Broad/Bimodal Polyethylene, Achieved by Polymer-Coated Particles Supporting Hybrid Catalyst

Preparation Of Comb-Shaped Polyolefin Elastomers Having Ethylene/1-Octene Copolymer Backbone And Long Chain Polyethylene Branches Via A Tandem Metallocene Catalyst System

Synthesis of Polyethylene with Bimodal Molecular Weight Distribution by Supported Iron‐based Catalyst

Preparation of Polyethylene Elastomers with Increased High Molecular Weight and Nearly Perfect Strain Recovery by Steric Control of Asymmetric Α-Diimine Nickel Catalyst

UHMWPE with Short‐chain Branches Synthesized by Alkenyl Substituted Phenoxy–imine Catalysts in Ethylene Polymerization

Control of Diffusion/Barrier Effects of Polymer-Coated Particles and the Strengthening of Ethylene Polymerization Reactor

Synthesis of Molecular Weight Controllable Bimodal Polyethylene from Fluorinated FI–Ti Catalyst Coupled with ZnEt2

Synthesis of Polyethylene-G-polydimethylsiloxane Graft Copolymers by Copolymerization of Ethylene with Polydimethylsiloxane Macromonomer

Weakly Entangled Ultrahigh Molecular Weight Polyethylene Prepared via Ethylene Extrusion Polymerization

Dual Bimodal Polyethylene Prepared By Intercalated Silicate With Nickle Diimine Complex

Ethylene Polymerization with Hybrid Nickel Diimine/cp2ticl2 Catalyst: a New Method to Prepare Blends of Linear and Branched Polyethylene

Access to Disentangled Ultrahigh Molecular Weight Polyethylene Via a Binuclear Synergic Effect

Synthesis of Pe with Broad Mwd Catalyzed by Supported Ziegler-Natta Catalyst Consisting of Cycloalkoxy Silane As Ied

Synthesis of Bimodal Polyethylene Using Ziegler-Natta Catalysts by Multiple H2 Concentration Switching in a Single Slurry Reactor

Judicious Reduction of Supported Ti Catalyst Enables Access to Disentangled Ultrahigh Molecular Weight Polyethylene

Facile Preparation of Bimodal Polyethylene with Tunable Molecular Weight Distribution from Ethylene Polymerization Catalyzed by Binary Catalytic System in the Presence of Diethyl Zinc

Nonisothermal Crystallization Kinetics of Ethylene-Butene Copolymer/Low-Density Polyethylene Blends

The in Situ Synthesis of Weakly Entangled Ultrahigh‐molecular‐weight Polyethylene/polyethylene Wax Blends and Its Synergetic Disentanglement Effect on LLDPE Reinforcement

Reduced Entanglement Density of Ultrahigh-Molecular-Weight Polyethylene Favored by the Isolated Immobilization on the MgCl2 (110) Plane

Synthesis of Hyperbranched Polyethylene and Carboxylate Functionalized Polyethylene Using Bis(benzocyclopentyl) α-Diimine Pd(II) Catalysts with Axial Substituent-Constrained Strategy