Abstract:High yield of petrochemicals, such as light olefins and aromatics, is an important way for low-carbon utilization of petroleum. Based on China’s energy structure and technological advantages in the field of catalytic cracking, the direct production of light olefins and aromatics from heavy feedstock oil under the confinement of molecular sieves is an important development direction of China’s oil refining industry. It poses great challenges to the design of multi-phase reactors. Counter-current interaction between feed-oil and deep-cracking catalysts under high severity should be achieved to prevent preferential adsorption of heavy aromatics, reduce diffusion resistance in zeolitic nanopores, and boost deep cracking of short-chain alkanes. Millisecond residence time and plug-flow residence time distribution should be obtained to inhibit secondary reactions and reduce dry gas and coke production. This review focuses on the progress of discrete transport, reaction, and deactivation processes in the catalytic cracking of heavy oil directly to chemicals, as well as the progress of gas-solid heterogeneous reaction engineering and other related fields. The latest research work on the discrete adsorption-diffusion phenomenon and host-guest interactions of small molecules in zeolites are introduced, and it is proposed to use facet-selective nanosized zeolites with high resistance to coke formation and gas-solid counter-current contact plug flow reactors to overcome the above challenges. Finally, the multi-stage downer catalytic pyrolysis（MDCPTM） developed by Tsinghua University is introduced, which uses multi-stage downers in series while achieving both millisecond-level plug-flow within one stage and counter-current gas-solids interaction between each stage. In the 1 kg/h pilot plant,MDCPTM can gain excellent production distribution [51.54%（mass） yield of light olefins and 80.78%（mass）selectivity of BTEX in gasoline]. With MDCPTM as the core unit, the process, i.e., heavy oil to chemicals（HOTC）, is reported where the yield of the total chemicals can be up to 75%（mass）, with carbon emission reduced by more than 70% compared with existing technologies.

Technology: OCC process for propylene production

Direct Conversion of Methane to Propylene

Novel Binder-Less Hierarchical ZSM-5 Catalyst for Olefins Catalytic Cracking to Produce Propylene

Aqueous-Phase Processing on Multi-Functional Compounds over Platinum–Rhenium Supported on Carbon

Conversion of the off Gas from Polypropylene Process

Targeted Catalytic Cracking to Olefins (TCO): Reaction Mechanism, Production Scheme, and Process Perspectives

Solvent Screening and Process Optimization for Separating Propylene Oxide from Direct Propylene Epoxidation with H2 and O2

Development of Propylene Production Enhancement Technology

Chemical and engineering bases for green H2O2 production and related oxidation and ammoximation of olefins and analogues

Method for producing propylene ethane by carbon-containing olefin catalytic cracking

THERMODYNAMICS ANALYSIS AND REACTION PERFORMANCE OF THE PRODUCTION OF PROPYLENE AND ETHYLENE FROM C4OLEFINS CRACKING

Direct Production of Lower Olefins from CO2 Conversion via Bifunctional Catalysis

Research Progress on Propylene Preparation by Propane Dehydrogenation

Heavy Oil to Chemicals: Multi-Stage Downer Catalytic Pyrolysis

Epoxidation of propylene to propylene oxide catalyzed by large-grain TS-1 in supercritical CO2

Highly Selective Conversion of Carbon Dioxide to Lower Olefins

One-step leap in achieving oil-to-chemicals by using a two-stage riser reactor: Molecular-level process model and multi-objective optimization strategy

Catalytic Cracking of Lower-Valued Hydrocarbons for Producing Light Olefins

One-Pot Synthesis of Propylene Carbonate Through Tandem Epoxidation-Cycloaddition Reaction from Propylene and CO2

Progress in Catalytic Epoxidation of Propylene to Propylene Oxide

System integration and evaluation of residual oil deep catalytic cracking process coupled with CO 2 recycle to produce polypropyl carbonate