Heavy Oil to Chemicals: Multi-Stage Downer Catalytic Pyrolysis

XIONG Hao,LIANG Xiaoyu,ZHANG Chenxi,BAI Haolong,FAN Xiaoyu,WEI Fei
DOI: https://doi.org/10.11949/0438-1157.20221188
2023-01-01
Abstract:High yield of petrochemicals, such as light olefins and aromatics, is an important way for low-carbon utilization of petroleum. Based on China’s energy structure and technological advantages in the field of catalytic cracking, the direct production of light olefins and aromatics from heavy feedstock oil under the confinement of molecular sieves is an important development direction of China’s oil refining industry. It poses great challenges to the design of multi-phase reactors. Counter-current interaction between feed-oil and deep-cracking catalysts under high severity should be achieved to prevent preferential adsorption of heavy aromatics, reduce diffusion resistance in zeolitic nanopores, and boost deep cracking of short-chain alkanes. Millisecond residence time and plug-flow residence time distribution should be obtained to inhibit secondary reactions and reduce dry gas and coke production. This review focuses on the progress of discrete transport, reaction, and deactivation processes in the catalytic cracking of heavy oil directly to chemicals, as well as the progress of gas-solid heterogeneous reaction engineering and other related fields. The latest research work on the discrete adsorption-diffusion phenomenon and host-guest interactions of small molecules in zeolites are introduced, and it is proposed to use facet-selective nanosized zeolites with high resistance to coke formation and gas-solid counter-current contact plug flow reactors to overcome the above challenges. Finally, the multi-stage downer catalytic pyrolysis(MDCPTM) developed by Tsinghua University is introduced, which uses multi-stage downers in series while achieving both millisecond-level plug-flow within one stage and counter-current gas-solids interaction between each stage. In the 1 kg/h pilot plant,MDCPTM can gain excellent production distribution [51.54%(mass) yield of light olefins and 80.78%(mass)selectivity of BTEX in gasoline]. With MDCPTM as the core unit, the process, i.e., heavy oil to chemicals(HOTC), is reported where the yield of the total chemicals can be up to 75%(mass), with carbon emission reduced by more than 70% compared with existing technologies.
What problem does this paper attempt to address?