Abstract:High yield of petrochemicals, such as light olefins and aromatics, is an important way for low-carbon utilization of petroleum. Based on China’s energy structure and technological advantages in the field of catalytic cracking, the direct production of light olefins and aromatics from heavy feedstock oil under the confinement of molecular sieves is an important development direction of China’s oil refining industry. It poses great challenges to the design of multi-phase reactors. Counter-current interaction between feed-oil and deep-cracking catalysts under high severity should be achieved to prevent preferential adsorption of heavy aromatics, reduce diffusion resistance in zeolitic nanopores, and boost deep cracking of short-chain alkanes. Millisecond residence time and plug-flow residence time distribution should be obtained to inhibit secondary reactions and reduce dry gas and coke production. This review focuses on the progress of discrete transport, reaction, and deactivation processes in the catalytic cracking of heavy oil directly to chemicals, as well as the progress of gas-solid heterogeneous reaction engineering and other related fields. The latest research work on the discrete adsorption-diffusion phenomenon and host-guest interactions of small molecules in zeolites are introduced, and it is proposed to use facet-selective nanosized zeolites with high resistance to coke formation and gas-solid counter-current contact plug flow reactors to overcome the above challenges. Finally, the multi-stage downer catalytic pyrolysis（MDCPTM） developed by Tsinghua University is introduced, which uses multi-stage downers in series while achieving both millisecond-level plug-flow within one stage and counter-current gas-solids interaction between each stage. In the 1 kg/h pilot plant,MDCPTM can gain excellent production distribution [51.54%（mass） yield of light olefins and 80.78%（mass）selectivity of BTEX in gasoline]. With MDCPTM as the core unit, the process, i.e., heavy oil to chemicals（HOTC）, is reported where the yield of the total chemicals can be up to 75%（mass）, with carbon emission reduced by more than 70% compared with existing technologies.

System integration and evaluation of residual oil deep catalytic cracking process coupled with CO 2 recycle to produce polypropyl carbonate

Carbon-efficient production planning for long-chain integrated refinery-petrochemical processes: A material-energy-carbon optimization perspective

Opportunities for converting waste plastics into petrochemicals: Process design, multi-objective optimization, and omnidirectional techno-economic-society-environment assessment

Retrofit application of traditional petroleum chemical technologies to coal chemical industry for sustainable energy-efficiency production

Opportunities for utilizing waste cooking oil in crude to petrochemical process: Novel process design, optimal strategy, techno-economic analysis and life cycle society-environment assessment

Collaborative Optimization of Pollution and Carbon Reduction Through Carbon Flow Tracking Integrated with Life Cycle Assessment for Petrochemical Production

Co-cracking of atmospheric residue and plastic waste

Integrated Biorefinery Scheme Design For The Co-Production Of Premium Quality Liquid Fuels And Propylene

Polymeric Catalyst with Discrete Distributed Active Centers for Regulating Backbone Structure of Poly(propylene Carbonate)†

Catalytic pyrolysis of polyolefin waste into valuable hydrocarbons over reused catalyst from refinery FCC units

Conceptual design and techno-economic analysis of a novel propane dehydrogenation process integrated with chemical looping combustion and CO 2 hydrogenation

A novel approach to CO2 capture in Fluid Catalytic Cracking—Chemical Looping Combustion

Study on Application of Bi-Directional Combination Technology Integrating Residue Hydrotreating with Catalytic Cracking Ricp

Process and Integration Optimization of Post-Combustion CO2 Capture System in a Coal Power Plant

Low-rank Coal Pyrolysis Polygeneration Technology with Semi-Coke Heat Carrier Based on the Dual-Fluidized Bed to Co-Produce Electricity, Oil and Chemical Products: Process Simulation and Techno-Economic Evaluation

Plastic Waste Conversion over a Refinery Waste Catalyst

Heavy Oil to Chemicals: Multi-Stage Downer Catalytic Pyrolysis

Process study and CO2 emission reduction analysis of coal liquefaction residue fluidized bed pyrolysis

Sustainable design and optimization of co-processing of bio-oil and vacuum gas oil in an existing refinery

Enhanced biofuel production by co-pyrolysis of distiller's grains and waste plastics: A quantitative appraisal of kinetic behaviors and product characteristics