Abstract:Thermal control materials such as white paint comprising silicone resin matrix (NASDA-1049/101-S), black paint comprising urethane resin matrix (NASDA-1049/201-U-I), aluminized polyimide adhesive tape (Sheldahl G408810) and silver-backed fluorinated ethylene propylene (silvered FEP) adhesive tape (Sheldahl G402500) were exposed to electron beam (EB), proton (H + ), iron ion (Fe 5+ ), ultraviolet (UV) and atomic oxygen (AO) radiation with ground simulation test facilities. Combined irradiation of EB → UV and another combined irradiation of EB → AO, where EB was irradiated at first and then UV or AO was irradiated, were also examined for white paint and black paint. Irradiation energies were 0.5 and 1.9 MeV for EB; 1, 3 and 10 MeV for H + ; 15 MeV for Fe 5+ ; equal to or larger than 3.1 eV for UV; and 5 eV for AO. Fluences of EB, H + and Fe 5+ were selected to simulate the environment of geostationary orbit (GEO) for 10 years. UV irradiation was equal to 300 equivalent solar days. AO fluence corresponded to the environment of low Earth orbit (LEO) for about 1 year. The solar absorptance (α S ) and normal infrared emittance (ε N ) of the examined materials both before and after irradiation were acquired. The durability of the materials against each irradiation treatment was judged by evaluating the changes in α S and ε N . White paint and black paint were strongly affected by AO, EB → UV, EB → AO and UV irradiation. White paint was also affected by EB and weakly by H + and Fe 5+ . Aluminized polyimide and silvered FEP were degraded most by AO and EB. EB had a stronger effect than ions (H + ,Fe 5+ ) in all the samples, the reason for which can be explained by the larger absorbed dose with EB compared with ions. The mass loss caused by the irradiation treatment was also measured for white paint and black paint. Analytical techniques such as scanning electron microscopy (SEM), electron spectroscopy for chemical analysis (ESCA) and Fourier transform infrared spectroscopy (FTIR) were applied to identify morphology and composition of the materials to obtain a deeper understanding of the mechanism of space environment effects on the materials.

Radiation Effects of Low-Energy Particles on Optical Performance of Al Film Reflector

Researches on Laser Damage Resistance of Optical Films

Scratch-resistant Antireflective Coating for Mid-Wave Infrared Band

Al mirrors in vacuum ultraviolet region

Investigation on Solar Absorption and Thermal Emittance of Al Films Deposited by Magnetron Sputtering

A Research of Thickness Measurement of Nano-Porous Alumina Films Based on Reflection Spectrum

Study of the Effect of Radiation Exposure on Grain Size and Mechanical Properties of Thin-Film Aluminum

In-depth investigation of low-energy proton irradiation effect on the structural and photoresponse properties of ε-Ga2O3 thin films

Effect of residual impurities on the behavior and laser-induced damage of oxide coatings exposed to deep space radiation

Research on the Stray Light Protection Functional Film Characteristics: Laser Parameter Correlation with Irradiation Damage

Irradiation effects on microstructure, mechanical properties, and lead-bismuth eutectic corrosion resistance of alumina coating

Performance and prospects of far ultraviolet aluminum mirrors protected by atomic layer deposition

The Impacts of Localized Backside Etching on Proton Radiation Response in SOI Passive Devices

Research on Irradiation Electric Field for Charged Particles Beam with High Energy

Optical effects of metallic mirror surface modification

The Effects of Zr Underlayer on the Microstructure and Properties of Al Films

Effects of Gamma Irradiation on Functional Response of Relaxor-Ferroelectric Thin Films

Evolution of optical properties and molecular structure of PCBM films under proton irradiation

Study of Gamma-Ray Radiation Effects on the Passivation Properties of Atomic Layer Deposited Al2O3 on Silicon Using Deep-Level Transient Spectroscopy

Evaluation and Analysis of Thermal Control Materials under Ground Simulation Test for Space Environment Effects

Surface Degradation of Thin-Layer Al/MgF2 Mirrors under Exposure to Powerful VUV Radiation