Abstract:A new emulsion polymerization process, in which water acted as the dispersed phase and a mixture of methyl methacrylate (MMA) and cyclohexane acted as the continuous phase, was applied to the preparation of a poly(methyl methacrylate) (PMMA) resin. The primary (latex) particles were formed in the early stage of polymerization and coagulated as the polymerization conversion increased. Scanning electron micrographs showed that the final PMMA particles were porous and composed of loosely aggregated primary particles. The porosity characterized by cold di(2ethythexyl) phthalate absorption increased as the water/oil and cyclohexane/MMA mass ratios increased. The PMMA primary particles were smaller than the primary particles in the PMMA, resin prepared by suspension polymerization in the presence of cyclohexane. Because of the phase composition of the reaction system, the solubility of PMMA in a mixture of cyclohexane and MMA, and the particle morphology of PMMA, a particle formation mechanism, including the formation growth, and coagulation of primary particles in dispersed water droplets, was proposed. The primary particles formed mainly through a homogeneous nucleation mechanism and increased in size as MMA diffused from the oil phase to the water phase to the primary particles. The coagulation of the primary particles occurred because of the lower colloidal stability and the space limitations of the primary particles. (C) 2004 Wiley Periodicals, Inc.

Microstructure and Properties of Poly(methyl Methacrylate)coated on the Surface of Calcium Carbonate Nanopaticles by In-Situ Polymerization

Preparation of Poly (methyl Methacrylate)/nanometer Calcium Carbonate Composite by In-Situ Emulsion Polymerization

In-Situ Heterogenous Polymerization of Methyl Methacrylateonto Nanometer Calcium Carbonate Particles

The Mechanical and NIR Studies on Ultrafine Calcium Carbonate Treated by Four Surface Modifiers.

In Situ Polymerization of Poly(methyl Methacrylate)/clay Nanocomposites in Supercritical Carbon Dioxide

Preparation of Poly(methyl Methacrylate)/ultrafine CaCO3 Composite Particles by In-Situ Dispersion Polymerization

The Study on Mechanism, Interfacial Properties of PS-b-PAA Copolymer Coated Calcium Carbonate Particulate

Polymer/MMT nano-composite coatings formed by colloidal packing and their properties

Effect of Trimethylolpropane Triacrylate Cross-Linkages on the Thermal Stability and Char Yield of Poly (methyl Methacrylate) Nanocomposites

Mechanism and surface characteristics of polyacrylic acid-coated ultra-fine CaCO3

Modification of Poly(vinyl Chloride) with Nano-CaCO3 Coated with Poly(methyl Methacrylate)

Study on Nano-Size PMMA Particles Prepared by O/W Microemulsion Polymerization —— Particle Diameter and Its Distribution, Molecular Weight and Microstructure of PMMA

Structure and Properties of Poly(methyl Methacrylate) Particles Prepared by a Modified Microemulsion Polymerization

Effect of Oleic Acid-modified Nano-CaCO3 on the Crystallization Behavior and Mechanical Properties of Polypropylene

Modified Silicon Nitride Nanopowder Coating and Its Influence on the Dynamic Mechanical Property of Polymethyl Methacrylate Nanocomposite

Particle Features of A Poly(Methyl Methacrylate) Resin Prepared by A New Emulsion Polymerization Process

Research on the Microstructure Formation of Polyacrylate Latex Modified Mortars

Synthesis and Characterization of PMMA/Organomodified Montmorillonite Nanocomposites Prepared by in Situ Bulk Polymerization

Synthesis and characterization of PMMA/Al2O3 composite particles by in situ emulsion polymerization

Ca carboxylate formation at the calcium/poly(methyl methacrylate) interface