Abstract:Lanthanum hexaboride (LaB6) nanostructures have attracted much attention in recent years because they exhibit high electrical conductivity and thermal conductivity, low work function and high chemical stability, and can be expected to be an ideal cold cathode electron source for power device applications. Although some groups have developed means to grow LaB6 nanostructures and investigated their emission properties, the moderate synthesis of the LaB6 nanostructure cathode with high-performance is still a challenging issue. Here we developed a simple one-step chemical vapour deposition (CVD) method to prepare the LaB6 nanowire cold cathode film. The LaB6 nanowires have a mean length of tens of micrometres and their average diameter is about 100 nm. The formation of the nanowires is attributed to the synergy of the vapour-liquid-solid (VLS) and vapour-solid (VS) mechanisms. The LaB6 nanowires are found to have a low turn-on (2.2 V mu m(-1)) and threshold field (2.9 V mu m(-1)) as well as nice field emission (FE) stability with a current fluctuation of only 1.7%. And their emission current can reach 5.6 mA (16.7 mA cm(-2)) at 4.1 V mu m(-1), which is large enough for the high-current requirements of cathodes used in power devices. Moreover, the LaB6 nanowires still retain excellent performance even if the operation temperature is raised up to 773 K. It is noted that the LaB6 nanowire film exhibits quite different emission behaviours during a temperature cycling between room temperature and 773 K. The adsorption and desorption of oxygen onto and from the nanowire's surface is suggested to explain the discrepancy of such emission properties based on a series of our designed experiments. Most importantly, the LaB6 nanowire cathode film can almost recover to the original excellent FE performances after detachment of the surface oxygen molecules, which suggests that they should be ideal cathode nanomaterials for power device applications.

Discharge Performance of LaB6 Cathode in Helium and Nitrogen of Low Pressure

Electrical and thermal characteristics of LaB6 thermionic hollow cathodes operating in He, D2, Ar, and Xe at 4–200 Pa and 0.25–5 A cm−2

Pulse Thermionic Emission Performance of Multi-Crystal LaB6 Cathode

Performance of LaB$_6$-Emitters for Neutral Gas Pressure Gauges During Plasma Operation in the Large Helical Device

Current Status of 5A Lab6 Hollow Cathode Life Tests in Lanzhou Institute of Physics, China

Large Area Ring-Shaped LaB6 Cathode

A moderate synthesis route of 5.6 mA-current LaB6 nanowire film with recoverable emission performance towards cold cathode electron source applications

Discharge Characteristics of Protective Lab6 Thin Films in an Ac Plasma Display Panel

Field Emission Characteristics of LaB6 Single Tip Emitter

Investigation of discharge voltage characteristics of a lanthanum hexaboride heaterless hollow cathode

Fabrication and Emission Properties of Single Crystal Lanthanum Hexaboride Tip

Experimental study on the DC discharge characteristics of wire-to-cylinder electrode configuration at high temperature

Gas Absorption and Discharge Behaviors of Lead-Lithium

Evolution of Helium DBD at Atmospheric Pressure

Analysis of the Discharge Modes of Atmosphere Dielectric Barrier Discharges of Helium, Argon and Nitrogen

A Simple Replacement of Tungsten Filament Hot Cathodes by DC Heated LaB6 Rod and Its Noise Characteristics with Laser-Induced Fluorescence.

Fabrication and Emission Properties of LaB 6 Field Emission Microtriodes

Experimental and Simulation Study of Pulsed Micro-Hollow Cathode Discharge in Atmospheric-Pressure Helium

The Effect of Voltage Pulse Shape on the Discharge Characteristics in the Packed Bed Reactor under Air and Nitrogen

Axial and Radial Evolution of the Dielectric Barrier Discharge in Helium at Atmospheric Pressure