Abstract:This paper presents the results of 4 reactor campaigns on the irradiation of biphasic lithium ceramics containing different ratios of lithium orthosilicate (LOS) and lithium metatitanate (LMT) components (25 and 35 mol% LMT in LOS). The size distribution of pebbles in pebble beds was 250-1250 μm and 500-710 μm, respectively. The studies were carried out sequentially with each type of ceramics. In experiments carried out using the vacuum extraction method, the composition of gases released from lithium ceramic samples was registered in in-situ mode. The absence of purge gas during the experiments minimized the possibility of T 2 O and HTO formation, significantly simplifying processing of the results and providing more opportunities for results analysis. The main goal of the present paper was to identify the general patterns of the release of gases with mass numbers M2 (H 2 ), M4 (He + HT), M6 (T 2 ) and M18 (H 2 O) from ceramic samples throughout the entire irradiation experiment in 4 campaigns. Release trends of main gases with mass numbers M2, M4, M6 and M18 for all four campaigns are presented and their comparative analysis was performed. The average partial pressure of tritium release in the form of T 2 and HT molecules for all campaigns was determined as 5.8 · 10 -7 Torr. The dependences of formation rates of helium release peaks on the irradiation time were plotted. The nature of peak emissions does not have a monotonic relationship; upon irradiation, both an increase in the frequency of peaks and a decrease in it are observed. During irradiation, the process of peak helium release does not stop. The simulation was carried out by the finite element method, assuming that tritium release from the sample is determined by diffusion and desorption processes from the sample surface. The experimental curves are satisfactorily described by a number of sets of desorption and diffusion parameters. One way or another they lie in the range of specified values. The Arrhenius dependences of the effective diffusion coefficient and desorption coefficient obtained for lithium ceramics 35 LMT are equal to: D=5,2×10-11m2sexp-21kJmoleRT, K=1.21×10-4m2sexp-64kJmoleRT. The values of the effective diffusion coefficient and tritium desorption coefficient in 25 LMT ceramics were 15 and 20% lower than in 35 LMT ceramics.

Gas Absorption and Discharge Behaviors of Lead-Lithium

Brillouin Scattering Studies Of Liquid Argon At High Temperatures And High Pressures

Velocity Profile Measurement of Lead-Lithium Flows by High-Temperature Ultrasonic Doppler Velocimetry

Pressure Effect on the Thermal Runaway Behaviors of Lithium-Ion Battery in Confined Space

Critical Current Density Measurements of Argyrodite Li6PS5Cl Solid Electrolyte at Ambient Pressure

Gassing behavior of lithium titanate based lithium ion batteries with different types of electrolytes

Experimental Research on Thermal-Venting Characteristics of the Failure 280 Ah Lifepo4 Battery: Atmospheric Pressure Impacts and Safety Assessment

Composition and Explosibility of Gas Emissions from Lithium-Ion Batteries Undergoing Thermal Runaway

Differences in Interfacial Reactivity of Graphite and Lithium Metal Battery Electrodes Investigated Via Operando Gas Analysis

Comparative analysis of gas release from biphasic lithium ceramics pebble beds of various pebbles sizes and content under neutron irradiation conditions

Gas analysis in electrochemical extraction of hydrogen from liquid lithium

A review of gassing behavior in Li4Ti5O12-based lithium ion batteries

Experimental Study on Thermal Runaway Behavior of Lithium-Ion Battery and Analysis of Combustible Limit of Gas Production

Gas release rates and properties from Lithium Cobalt Oxide lithium ion battery arrays

Experimental Study on the Internal Pressure Evolution of Large-Format LiFePO4 Battery During Thermal Runaway

Volatilisation Behaviour and Mechanism of Lead-Containing Slag during Physical Property Tests

Methods–Temperature-Dependent Gassing Analysis by On-Line Electrochemical Mass Spectrometry of Lithium-Ion Battery Cells with Commercial Electrolytes

Investigation of Gas Diffusion Behavior and Detection of 86 Ah LiFePO4 Batteries in Energy Storage Systems During Thermal Runaway

Thermal Abusive Experimental Research on the Large-Format Lithium-Ion Battery Using a Buried Dual-Sensor

Behavior of Lithium Amide Under Argon Plasma

Thermal Runaway Vent Gases from High-Capacity Energy Storage LiFePO4 Lithium Iron