Abstract:Suspension plasma spray is a promising technology for surface coatings. In this work, a comprehensive numerical model was developed to investigate the multiphase flow of suspension droplets and nanoparticles in direct-current (DC) plasma spraying. A three-dimensional computational model was developed to describe the plasma jet flow fields coupled with the axial injection of suspension droplets in which the zirconia micro- and nanoparticles were dispersed. The suspension droplets were tracked using Lagrangian coordinates, considering particle heating, melting, and evaporation. After evaporation of the solvent surrounding the particle, the nanoparticles were discharged into the plasma flow. In addition to the viscous force exerted by the flow on the micrometer-sized particles, the Brownian force and the Saffman lift force were taken into account. The effects of the noncontinuum on particle momentum transfer and evaporation on heat transfer were also considered. The numerical predictions of gas flow temperature were compared with experimental data and numerical data obtained with a different computational fluid dynamics code. The agreement was reasonable. The trajectories, velocity, and temperature of nanoparticles were calculated, and compared with those of microparticles. The results showed that the Brownian force plays a major role in acceleration and heating of nanoparticles. Compared with the conventional plasma spray process with micrometer-sized feedstock, the nanoparticles in suspension plasma spraying were found to have a wider spatial distribution and higher temperature. The effects of operating parameters, such as the power input to the plasma gas and plasma gas composition, on the gas velocity and temperature were investigated. The parameters that have a significant effect on the heat and momentum transfer to the particles injected in the plasma jet were identified.

Study of Multi-Function Micro-Plasma Spraying Technology

Integrated Robotic Plasma Spraying System for Advanced Materials Processing

A Review and Progress of Multiphase Flows in Atmospheric and Low Pressure Plasma Spray Advanced Coating

Modeling of Micro- and Nanoparticle Characteristics in DC Suspension Plasma Spray

An Introduction And Progress Of A Novel Atmospheric Laminar Plasma Spray Method

Study on Microcomputer Controlled Plasma Spray Power Source with High Power SCR

Process Optimization of Supersonic Plasma Transfer Arc Spraying Aluminum Coating by Response Surface Method

Effect of Spraying Parameters on the Microstructure and Mechanical Properties of Micro-Plasma Sprayed Alumina-Titania Coatings

Modeling of non-Newtonian suspension plasma spraying in an inductively coupled plasma torch

Numerical Studies of Arc Plasma Generation in Single Cathode and Three-Cathode Plasma Torch and Its Impact on Plasma Spraying

Low-pressure Plasma Spraying Technology and Its Research Status

Improving microstructure and properties by multi-function micro-plasma spraying

Experimental Studies on the New Technologies of Plasma Arc Spray Forming

Research status and development tendency of plasma spray torch

Investigation on the deposition rate and the dilution ratio of plasma surface welding

The study on plasma-Mig hybrid arc behaviour and droplet transfer for mild steel welding

Development of pulsed magnetic field assisted supersonic plasma spraying

Recent Development on Plasma Spray Technology

The Development of a High Efficiency Supersonic Plasma System

The Effect of Plasma Spray Parameters on the Quality of Al-Ni Coatings

Characteristic and Application Study of Multi-Cathodes Metal Plasma Source