Abstract:In this work, a spike-tubular electrostatic device was developed for effectively removing particulate matter (PM) and VOCs, based on multi-stage electric field enhancement and expanded arc interface ratio of corona discharge. In the experiment, it was equipped with a portable 12 V D.C. power supply module and a fan module; PM from moxa smoke, mainly composed of submicron particles with a high penetrate rate, and HCHO were employed to test its electrostatic precipitation and oxidation ability, respectively. Additionally, CFD numerical simulation was adopted to investigate the characteristics of the electric field, the flow field, and the ozone generation. Experi-mental results showed that the electrostatic device could remove 99% of the fine particles at 2 m/s. Meanwhile, it could also remove HCHO of 2.14 x 103-1.07 x 104 mu g/m(3) concentration with 100% efficiency. By comparison, its oxidation capacity could be about 80 times that of ozone oxidation, revealing the enhanced oxidation ability of other short-living reactive species. Simulation results proved that the promising purification performance resulted from the locally enhanced electric field strength, up to 2 x 10(7) V/m in the central region, and sufficient contact between pollutants and the corona discharge region. Finally, as verified by the airtight chamber cycle experiment and case comparison, the device owns feasible purification ability and promising energy yield (0.79 g/kWh) in the application. Moreover, prospects and strategies for the device's practical application in air pu-rification and disinfection were proposed, which may provide helpful enlightenment for air purification.

Study on plasma spraying graphite purification device

Fundamentals and Environmental Applications of Non-thermal Plasmas: Multi-pollutants Emission Control from Coal-Fired Flue Gas

Effects of Purification on the Properties and Microstructures of Natural Flake and Artificial Graphite Powders

Study on High Temperature Purification of Gaseous Contaminants

A Novel Method for Purification of Low Grade Diatomite Powders in Centrifugal Fields

Experimental Investigation on the Purification of Natural Flake Graphite with Auxiliary Alkali-Acid Method

Study of Multi-Function Micro-Plasma Spraying Technology

Study on the Control of Condensable Particulate Matter by Spraying Activated Carbon Combined with Electrostatic Precipitator

Purification and characterization of single-walled carbon nanotubes produced by arc-discharge

Study on Purification and Modification Processing Technology of Microcrystalline Graphite

Thermal and gas purification of natural graphite for nuclear applications

An Introduction And Progress Of A Novel Atmospheric Laminar Plasma Spray Method

Cleaning of nitrogen-containing carbon contamination by atmospheric pressure plasma jet

Study on Air Cleaning Technology of Nanometer TiO2 Catalysis under Plasma Discharge

Experimental Investigation on a Novel Agglomeration Device Based on Charged Ultrasonic Spray and Vortex Generators for Improving the Removal of Fine Particles

Removal of Air Pollutant by a Spike-Tubular Electrostatic Device: Multi-stage Direct Current Corona Discharge Enhanced Electrostatic Precipitation and Oxidation Ability

Study on purification of flake graphite by heat activation and hydrofluoric acid

Pilot-Scale Investigation on a Spraying Pretreatment Process Integrated with an Axial Flow Cyclone to Separate Fine Particles with Low Energy Consumption

STUDY ON THE SURFACE MODIFICATION OF NANOMETER CARBON PARTICLES IN ATMOSPHERIC PLASMA

Mechanism on the plasma-catalytic oxidation of graphitic carbon over Au/γ-Al2O3 by in situ plasma DRIFTS-mass spectrometer

Study on the recovery of graphite from spent carbon cathode via ultrasound-assisted foam flotation