Abstract:Suspension plasma spray is a promising technology for surface coatings. In this work, a comprehensive numerical model was developed to investigate the multiphase flow of suspension droplets and nanoparticles in direct-current (DC) plasma spraying. A three-dimensional computational model was developed to describe the plasma jet flow fields coupled with the axial injection of suspension droplets in which the zirconia micro- and nanoparticles were dispersed. The suspension droplets were tracked using Lagrangian coordinates, considering particle heating, melting, and evaporation. After evaporation of the solvent surrounding the particle, the nanoparticles were discharged into the plasma flow. In addition to the viscous force exerted by the flow on the micrometer-sized particles, the Brownian force and the Saffman lift force were taken into account. The effects of the noncontinuum on particle momentum transfer and evaporation on heat transfer were also considered. The numerical predictions of gas flow temperature were compared with experimental data and numerical data obtained with a different computational fluid dynamics code. The agreement was reasonable. The trajectories, velocity, and temperature of nanoparticles were calculated, and compared with those of microparticles. The results showed that the Brownian force plays a major role in acceleration and heating of nanoparticles. Compared with the conventional plasma spray process with micrometer-sized feedstock, the nanoparticles in suspension plasma spraying were found to have a wider spatial distribution and higher temperature. The effects of operating parameters, such as the power input to the plasma gas and plasma gas composition, on the gas velocity and temperature were investigated. The parameters that have a significant effect on the heat and momentum transfer to the particles injected in the plasma jet were identified.

Plasma Spray Process Operating Parameters Optimization Based on Artificial Intelligence

Optimization of Plasma Deposition Manufacturing Parameters Using a Hybrid ANN-GAs Method

Prediction of Control Parameters Corresponding to In-Flight Particles in Atmospheric Plasma Spray Employing Convolutional Neural Networks

Intelligent process modeling of robotic plasma spraying based on multi-layer artificial neural network

Prediction of Particle Properties in Plasma Spraying Based on Machine Learning

Process Parameter Optimization of Plasma Sprayed Nanostructured Al2o3-13 % Tio2 Coating Based on Genetic Algorithm

Modeling of Micro- and Nanoparticle Characteristics in DC Suspension Plasma Spray

Integrated Robotic Plasma Spraying System for Advanced Materials Processing

Optimization of the Process Parameters of Nanostructured AT13 Coatings Prepared by Micro-plasma Spraying

Effect of In-Flight Particle Characteristics on the Coating Properties of Atmospheric Plasma-Sprayed 8mol% Y2O3–ZrO2 Electrolyte Coating Studying by Artificial Neural Networks

Effects of Atomization Injection on Nanoparticle Processing in Suspension Plasma Spray

A Novel Intelligent Adaptive Temperature Control Approach of Sprayed Coating for APS Process

Modeling of non-Newtonian suspension plasma spraying in an inductively coupled plasma torch

Plasma Spraying of Solution Precursor in Pulsed Mode: In-Flight Phenomena and Coating Deposition

Application of Artificial Neural Network to Quality Prediction of Ni Alloy Coatings Fabricated by Plasma Spraying

The Influence of Anode Inner Contour on Atmospheric DC Plasma Spraying Process

Experimental and Numerical Studies of Plasma Forming Process Parameters Effect on Optimum Particle Impact Locations

Adaptive Control of the Atmospheric Plasma Spray Process for Functionally Graded Thermal Barrier Coatings

Process Optimization of Supersonic Plasma Transfer Arc Spraying Aluminum Coating by Response Surface Method

Main Issues for a Fully Predictive Plasma Spray Torch Model and Numerical Considerations

Experimental Research of Technologic Parameters in Plasma Spray Tooling Process