Abstract:Abstract Artificial Neural Networks (ANNs) are well-established knowledge acquisition systems with proven capacity for learning and generalisation. Therefore, ANNs are widely applied to solve engineering problems and are often used in laser-based manufacturing applications. There are different pattern recognition and control problems where ANNs can be effectively applied, and one of them is laser structuring/texturing for surface functionalisation, e.g. in generating Laser-Induced Periodic Surface Structures (LIPSS). They are a particular type of sub-micron structures that are very sensitive to changes in laser processing conditions due to processing disturbances like varying Focal Offset Distance (FOD) and/or Beam Incident Angle (BIA) during the laser processing of 3D surfaces. As a result, the functional response of LIPSS-treated surfaces might be affected, too, and typically needs to be analysed with time-consuming experimental tests. Also, there is a lack of sufficient process monitoring and quality control tools available for LIPSS-treated surfaces that could identify processing patterns and interdependences. These tools are needed to determine whether the LIPSS generation process is in control and consequently whether the surface’s functional performance is still retained. In this research, an ANN-based approach is proposed for predicting the functional response of ultrafast laser structured/textured surfaces. It was demonstrated that the processing disturbances affecting the LIPSS treatments can be classified, and then, the surface response, namely wettability, of processed surfaces can be predicted with a very high accuracy using the developed ANN tools for pre- and post-processing of LIPSS topography data, i.e. their areal surface roughness parameters. A Generative Adversarial Network (GAN) was applied as a pre-processing tool to significantly reduce the number of required experimental data. The number of areal surface roughness parameters needed to fully characterise the functional response of a surface was minimised using a combination of feature selection methods. Based on statistical analysis and evolutionary optimisation, these methods narrowed down the initial set of 21 elements to a group of 10 and 6 elements, according to redundancy and relevance criteria, respectively. The validation of ANN tools, using the salient surface parameters, yielded accuracy close to 85% when applied for identification of processing disturbances, while the wettability was predicted within an r.m.s. error of 11 degrees, equivalent to the static water contact angle (CA) measurement uncertainty.

Optimization of Plasma Fabric Surface Treatment by Modeling with Neural Networks

Modeling Plasma Modification of Glass Surface Using Neural Networks

Optimization of Plasma Deposition Manufacturing Parameters Using a Hybrid ANN-GAs Method

Neural Networks Model of Polypropylene Surface Modification by Air Plasma

Intelligent process modeling of robotic plasma spraying based on multi-layer artificial neural network

Plasma Spray Process Operating Parameters Optimization Based on Artificial Intelligence

Double Glow Plasma Surface Alloying Process Modeling Using Artificial Neural Networks

Application of artificial neural networks in abrasive waterjet cutting process

Parameters Optimization of Plasma Hardening Process Using Genetic Algorithm and Neural Network

Artificial Neural Network Modeling for Predicting Melt Blowing Processing

Prediction and Optimization of Process Parameters for Composite Thermoforming Using a Machine Learning Approach

Design optimization of laminated composite structures using artificial neural network and genetic algorithm

Improving the Generalization Ability of an Artificial Neural Network in Predicting In-Flight Particle Characteristics of an Atmospheric Plasma Spray Process

Parameters optimization in plasma arc cutting of AISI 1020 mild steel plate using hybrid genetic algorithm and artificial neural network

A Novel Method Integrating Response Surface Method with Artificial Neural Network to Optimize Membrane Fabrication for Wastewater Treatment

Modeling and multi-objective optimization of abrasive water jet machining process of composite laminates using a hybrid approach based on neural networks and metaheuristic algorithm

Combined D-optimal design and generalized regression neural network for modeling of plasma etching rate

Forecast on Process of Double Glow Plasma Surface Alloying Based on Artificial Neural Network

Designing Structural Parameters of Nonwovens Using Fuzzy Logic and Neural Networks

Artificial neural network tools for predicting the functional response of ultrafast laser textured/structured surfaces

Optimization of FDM process parameters to minimize surface roughness with integrated artificial neural network model and symbiotic organism search