Abstract:Wide-angle and broadband antireflection (AR) coating is of the essence in modern optical systems in many fields, which has a great influence on the stray light and imaging quality. A simple and convenient manufacturing method is proposed to address this issue based on a composite coating combining the nano-tapered Al2O3•xH2O (AH) structure and high-low index thin film stack. The optical properties of nano-tapered AH structure at various thickness are first studied and modeled in optics by several homogeneous sub-layers with the graded equivalent index. The designed composite AR coatings are manufactured by vacuum deposition and wet etching subsequently in the hot deionized water. Compared to the common dielectric multilayer antireflection stack, the composite coating presents excellent AR performance. The measured average reflectance values of the double-side coated BK7 glass are as low as 0.40%, 0.41%, 0.56% and 3.13% in 400-1100nm band at angles of incidence (AOI) of 6°, 20°, 40°, and 60°, respectively, while the measured average transmittance at normal incidence increases up to 99.3%. Finally, the process reproductivity, environmental reliability test including long term storage, high temperature annealing and 85°C-85% relative humidity storage of the composite coatings are evaluated. The proposed AR scheme provides a low-cost, efficient, wide-angle and broadband AR coating for kinds of large-curvature components and complex surfaces in fields of consumer electronics, automotive, security, etc.

High Laser-Induced Damage Threshold Antireflection Coatings of 1053 nm Deposited by Ion Assisted Deposition

Studies on Infrared Absorption Loss of Antireflection Coatings on Germanium and Potassium Chloride Substrates at the Wavelength of 10.6μm by Photothermal Deflection Technique

Antireflective Coatings Used for High-Power Co2-Laser

Effect of multi-waveband antireflective coating on laser induced damage threshold of MgO doped LiNbO3

Precise broad-band anti-refection coating fabricated by atomic layer deposition

Study on performance of Nb2O5 films with ion assisted deposition

Laser-induced Heating of Mid-Infrared High Reflectance Coatings

Wide-angle Broadband Antireflection Coatings with Nano-Taper Hydrated Alumina Film.

Anti-reflection Coating at 550 Nm Fabricated by Atomic Layer Deposition

Hard Antireflective Coatings in the Visible Band

Toward improving the reflectivity of ablative heat-insulating coating under high-energy laser irradiation

Laser-induced damage properties of antireflective porous glasses

Laser Resistance Dependence of Interface for High-Reflective Coatings Studied by Capacitance-Voltage and Absorption Measurement

Experimental Investigation of Enhancing the Subsurface Damage Threshold of Nd-Doped Phosphate Glass

Influence of the deposition method on the laser induced damage threshold of HfO2 thin films

Laser-induced Damage Resistance of Thin-Film Polarizers Prepared by Ion-Assisted Deposition.

Effect of annealing on the properties of HfO2-Al2O3 mixture coatings for picosecond laser applications

Atomic layer deposition of Al2O3 and HfO2 for high power laser application

The effect of interval pulsed laser deposition on the microstructure and mechanical properties of Inconel 718 parts using laser directed energy deposition

Preparation Of The Oxyfluoride Glass With High 3 Omega Laser Induced Damage Threshold

Effect of the Dynamic Porous Structure Generation in Laser Irradiated Multi-Functional Coatings