Abstract:Highlights • The convection in the Cu pattern surface increase with the Cu layer thickness. • The mechanism of Cu layer improvement under high current density was explained. • The adsorption model of the convection-dependent additives during the high current density Cu pattern electroplating process was proposed. • The Cu pattern with excellent properties was electroplated under a current density of 8 ASD with an ultra-high rate of over 90 μm/h. Background Cu pattern electroplating plays an essential role in the interconnection and microstructure fabrication of high-power device packaging. However, improving efficiency while ensuring the preparation quality is an urgent breakthrough direction. Methods A new electrolyte formula suitable for the high-rate Cu pattern electroplating was put forward, including 300 mg/L polyethylene glycol (PEG, molecular weight=8000) and 6 mg/L thiazolinyl polydipropyl sulfonate (SH110). The mechanism of high-rate Cu pattern electroplating was investigated by the combination of fluid flow simulation and the electrochemical measurements including galvanostatic measurements (GMs) and cyclic voltametric (CV) tests. The Cu pattern was electroplated in the Haring-Cell with air bubble as the forced convection method. Significant findings The simulation results indicate that the flow rate on the ring-shaped cathodic pattern surface gradually increases with the Cu growing up, which also increase from the pattern surface to the bulk electrolyte. The GMs results suggest that the cathodic polarization of the convection-dependent additives raises with the current density, which is strengthened by strong convection with current density lower than 6 ASD but have the opposite effect with current density larger than 8 ASD. The CV tests indicating that the aggregation of weak convection and strong polarization promote the antagonistic effect between thiolate of SH110 and PEG, the nucleation and the electroplating rate. Nevertheless, the synergistic effect of thiazoline of SH110 and PEG are enhanced with strong convection and weak polarization. The adsorption model during the Cu pattern electroplating process is established and verified by electroplating experiment with the optimum current density of 8 ASD. The Cu pattern is mirror bright with the high electroplating rate of over 90 μm/h. Graphical abstract Download : Download high-res image (160KB) Download : Download full-size image

Profiled Anode for High Speed Continuous Plating on Thin Metal Strip

A continuous electroplating model for poorly conductive substrates

Ordered Planar Plating/stripping Enables Deep Cycling Zinc Metal Batteries

Optimum scheme of continuous electrodeposited porous metal materials

Finite Element Analysis of the Current Density Distribution in Micro-electroforming

A Perspective on Uniform Plating Behavior of Mg Metal Anode: Diffusion Limited Theory versus Nucleation Theory

Combined fluid flow simulation with electrochemical measurement for mechanism investigation of high-rate Cu pattern electroplating

Mass Transfer Enhancement Through Trapezoidal Anode in Dynamic Mask Electrodeposition of Metal Micropillar

Anode passivation mitigation by homogenizing current density distribution in electrocoagulation

Homogenization of electric field distribution facilitating the Zn anode reversibility

Uniformity Control of Ni Thin-Film Microstructures Deposited by Through-Mask Plating

A Scalable Slurry Process To Fabricate A 3d Lithiophilic And Conductive Framework For A High Performance Lithium Metal Anode

Ultrahigh‐Rate Zn Stripping and Plating by Capacitive Charge Carriers Enrichment Boosting Zn‐Based Energy Storage

Insight into the Critical Role of Exchange Current Density on Electrodeposition Behavior of Lithium Metal

Uneven Stripping Behavior, A killer of Mg Anode in Mist

A scalable slurry process to 3D lithiophilic and conductive framework for high performance lithium metal anode

Simulation assisted design and manufacturing of anode for the hard chrome plating of components with complex geometry

An Electrochemical Study of Micro-electroforming Ni for LIGA Technique

Role of Li‐Ion Depletion on Electrode Surface: Underlying Mechanism for Electrodeposition Behavior of Lithium Metal Anode

Stable Li Metal Anodes via Regulating Lithium Plating/Stripping in Vertically Aligned Microchannels

Toward Ultra-High-rate Copper Pattern Electroplating with Simultaneously Improved Coating Properties Via Simulations and Experiments