Abstract:The classical switching-table-based direct torque control (ST-DTC) suffers from issues such as large torque ripples, significant current harmonics, and variable switching frequency. In this paper, a novel ST-DTC is proposed to improve the current and torque steady-state performance for dual three-phase permanent magnet synchronous motor (DTP-PMSM). Firstly, proportional resonance (PR) controllers are used in the x-y subspace, and the x-y reference voltage generated by PR controllers is modulated by three fixed vectors based on the analysis of flux and torque slopes of voltage vectors with different amplitudes. This reduces current harmonics and computational burden of modulating the x-y reference voltage. Secondly, duty-ratio modulation is employed to reduce the torque ripple. However, under the traditional torque regulator, the duty-ratio modulation exists a torque range where it cannot achieve the instantaneous zero error of torque at the end of the control period. Therefore, the feedback value of the torque regulator is modified to further suppress torque ripple. Furthermore, to prevent generating incorrect switch sequences caused by the short dwell time of vectors and maintain the thermal balance of the inverter, an optimization of the switching sequence is performed. Finally, experimental results are presented to validate the effectiveness of the proposed method.

Direct Torque Control Based on Symmetrical Voltage Vectors Combination

Multi-level Converter-Based Torque Sharing Function Control Strategy for Switched Reluctance Motors

Direct Torque Control with Zero-Voltage Vector for a Permanent Magnet Synchronous Motor

A Sequential Direct Torque Control Scheme for Seven-Phase Induction Machines Based on Virtual Voltage Vectors

Direct Torque Control for 2L-VSI PMSM Using Switching Instant Table.

Direct Torque Control of the Induction Motor Fed with a Three-Level Inverter

An Effective Direct Torque Control Based on Space Vector Modulation for DTP-PMSM

A NEW APPROACH TO DIRECT TORQUE CONTROL OF INDUCTION MACHINES

Direct Torque Control for Induction Motors Based on Minimum Voltage Vector Error

Research on Torque Ripple Minimization Strategy for Direct Torque Control of Induction Motors

Implementation of Direct Torque Control Scheme for Induction Machines with Variable Structure Controllers

New Torque Direct Control Scheme Of Induction Machines And Its Dsp-Based Implementation

Variable-structure torque control of induction motors using space vector modulation

Direct Torque Control Based on Improved Discrete Space Vector Modulation

Direct Instantaneous Torque Control of Srm Based on New Flux Linkage Detection Method

A New Intelligent Control Strategy of Combined Vector Control and Direct Torque Control for Dynamic Performance Improvement of Induction Motor Drive

Study on the direct torque control of permanent magnet synchronous motor drives

Research on Sensorless DTC Systems Based on Predictive Control Method

STUDY ON THE PERFORMANCE OF DIFFERENT DIRECT TORQUE CONTROL METHODS FOR PERMANENT MAGNET SYNCHRONOUS MACHINES

Enhanced Direct Torque Control for a Three-Level T-Type Inverter

A Novel Switching-Table-Based Direct Torque Control with Improved Current and Torque Steady-State Performance for Dual Three-Phase PMSM