Abstract:The classical switching-table-based direct torque control (ST-DTC) suffers from issues such as large torque ripples, significant current harmonics, and variable switching frequency. In this paper, a novel ST-DTC is proposed to improve the current and torque steady-state performance for dual three-phase permanent magnet synchronous motor (DTP-PMSM). Firstly, proportional resonance (PR) controllers are used in the x-y subspace, and the x-y reference voltage generated by PR controllers is modulated by three fixed vectors based on the analysis of flux and torque slopes of voltage vectors with different amplitudes. This reduces current harmonics and computational burden of modulating the x-y reference voltage. Secondly, duty-ratio modulation is employed to reduce the torque ripple. However, under the traditional torque regulator, the duty-ratio modulation exists a torque range where it cannot achieve the instantaneous zero error of torque at the end of the control period. Therefore, the feedback value of the torque regulator is modified to further suppress torque ripple. Furthermore, to prevent generating incorrect switch sequences caused by the short dwell time of vectors and maintain the thermal balance of the inverter, an optimization of the switching sequence is performed. Finally, experimental results are presented to validate the effectiveness of the proposed method.

Study on the direct torque control of permanent magnet synchronous motor drives

Direct Torque Control with Zero-Voltage Vector for a Permanent Magnet Synchronous Motor

Comparative Study of Flux-Weakening Control Methods for Pmsm Drive over Wide Speed Range

Analysis of direct torque control in permanent magnet synchronous motor drives

An Effective Direct Torque Control Based on Space Vector Modulation for DTP-PMSM

Direct Torque Control for 2L-VSI PMSM Using Switching Instant Table.

An Improved Directtorque Control Technology Study for Permanent Magnet Synchronous Motor

Fuzzy Logic Direct Torque Control for Permanent Magnet Synchronous Motors

STUDY ON THE PERFORMANCE OF DIFFERENT DIRECT TORQUE CONTROL METHODS FOR PERMANENT MAGNET SYNCHRONOUS MACHINES

Simulation and experiment on direct torque control based on space vector pulse width modulation of PMSM

Torque and Flux Weakening Control with MTPV for Interior Permanent Magnet Synchronous Motor

Permanent Magnet Synchronous Motor Maximum Torque Per Ampere Control Based on Feedback Dissipative Realization

Direct Torque Control of Permanent Magnet Synchronous Motor with SVM

Direct Torque Control for Three-Phase Open-End Winding PMSM With Common DC Bus Based on Duty Ratio Modulation

Continuous Direct Torque Control of Permanent Magnet Synchronous Motor Based on Svm

Direct Torque Control Combined with Mtpa Concept for Open Winding Ipmsm

A Novel Switching-Table-Based Direct Torque Control with Improved Current and Torque Steady-State Performance for Dual Three-Phase PMSM

An Optimal Direct Torque Control Strategy for Surface-Mounted Permanent Magnet Synchronous Motor Drives

Sensorless Direct Torque Control for Permanent Magnet Synchronous Motor Based on Fuzzy Logic

Improved Direct Torque Control of Permanent Magnet Synchronous Motor in Electric Vehicle Drive

Torque Ripple Reduction of the Torque Predictive Control Scheme for Permanent-Magnet Synchronous Motors