Abstract:Basin insulator is an important component of SF6 gas insulated switchgear (GIS), and its fault is also one of the major causes of GIS equipment failure. Due to the large capacity of high voltage power system, the faulty basin insulators are generally burned severely by the high energy arc, so the fault diagnosis is very difficult. In this paper, the surface flashover pictures of several full-scaled GIS basin insulators under impulse voltage are collected, and the morphology features of flashover traces initiating from different positions are summarized. As a result, the surface flashover patterns are divided into three types: 1) surface of shielding electrode initiated flashover, 2) triple junction initiated flashover and 3) surface of insulator initiated flashover. The inception and development process of flashover are also summarized. Besides, the diagnosis method of discharge inception position is proposed. Firstly, check the ablation points at high voltage terminal. If there is a ablation point on the surface of shielding electrode, the flashover initiates from there. If there is only ablation point at the triple junction, the inception position depends on the flashover trace morphology: when the flashover trace disperses in a single direction towards grounding electrode or high voltage electrode, the flashover initiates from the opposite triple junction; when the flashover trace disperses towards both electrodes, the flashover initiates from the insulator surface. The dispersion direction could be directly distinguished from the black carbonized dendritic traces, or from the "white dendritic traces" with the auxiliary methods. The conclusions could help the substation maintenance staff do the root cause analysis of the surface flashover, and assist the researchers in the structural optimization design of basin insulator.

Clustering and Discriminating of Typical Characteristics of High Voltage Contaminated Insulator During Flashover

Applying S-Transform and SVM to Evaluate Insulator's Pollution Condition Based on Leakage Current

Dynamic Moisture of Energized Insulator Contamination Layers with Humidity Variation

Feature extraction and classification of surface discharges on an ice-covered insulator string during AC flashover using gray-level co-occurrence matrix

Development of Contamination Flashover Pre-Warning System and Analysis of Operating Experience

Pollution Flashover Characteristics of the Insulators Of±800 Kv HVDC Lines under High Altitude Areas

Hydrophobicity Grade Discrimination of High Voltage Composite Insulators Based on Water Trace Image Processing

Calculation of DC and AC Flashover Voltage of Polluted Insulators

Frequency Characters of Leakage Current on the Surface of Outdoor Insulators in Different Relative Humidity

Surface flashover patterns of GIS basin insulator under impulse voltage

Flashover Performance of Pre-contaminated and Ice-covered Composite Insulators to be Used in 1000 kV UHV AC Transmission Lines

Statistical analysis on the DC discharge path of ice-covered insulators under natural conditions

Influence of Temperature Difference on Wetting Characteristics of Insulators

Arc feature extraction and flashover warning of direct current composite insulator based on image processing using visible discharge images

Analysis On Flashover Performance Of Polluted Porcelain Insulators In High Conductivity Fog Environment

Icing Flashover Characteristics of 500 Kv AC Post Insulators

Influence of Hydrophobicity on Composite Insulator's Flashover Voltage Under Light Ice Accumulation Conditions

Mechanism of contaminant accumulation and flashover of insulator in heavily polluted coastal area

Intelligent prediction of 110kV insulator lightning flashover criteria based on random forest

Adaptive Neuro-Fuzzy Inference System Application of Flashover Voltage of High-Voltage Polluted Insulator

An experimental study of the flashover performances of outdoor high-voltage polymeric insulators under fan-shaped pollution and dry band location