Prediction of unsteady performance of propeller by using of surface panel method

Jian Hu,Sheng Huang,Peisheng Wang
2006-01-01
Abstract:The paper has predicted the range and volume of unsteady sheet cavitation of propeller by using of the surface panel method. For a given propeller, the three dimensional orthogonal coordinates are calculated based on the main propeller parameters and the blade section geometry. The panels' number of chordwise and spanwise are used in the spline interpolation on the surface of the blades, and the dividing points are the four corner points of the panels. The constant value source and doublet are distributed on the surface of the blades to simulate the thickness and the load. The integral equation is derived from Green Formula, the matrix of influence coefficient is calculated by Morino analytic formula, and the key blade method is adopted to reduce calculating time. The calculation in time domain is carried out from the moment when the rotation of the propeller becomes steady instead of from the moment when the rotation starts from the stationary condition. At every time step, a linear algebraic equation established on a key blade is solved numerically combined with Kutta condition. First, the length of the cavitation sheet is assumed, then the iterative calculation is carried out based on the cavity termination conditions as far as the thickness at the cavity end is zero. The calculating results at this time are the final astringent results. The comparison between the calculating results and the experimental results indicates that the present method is right and effective.
What problem does this paper attempt to address?