Abstract:Unsteady cavitating turbulent flow simulations need to be responsible for both cavitation and turbulence modeling issues. The Partially-Averaged Navier–Stokes (PANS) computational model developed from the RANS method and the k–ε turbulence model are used to model turbulent cavitating flow with a mass transfer cavitation model in the present paper. An objective of this study is to pursue more accurate estimates of unsteady cavitating flows with large-scale fluctuations at a reasonable cost. Firstly, the unsteady cavitating flow simulations over a NACA66-mod hydrofoil are performed using the PANS method with various values of the resolution control parameters (fk=1∼0.2, fε=1) to evaluate the numerical methods based on experimental data. The comparison with the experiments show that the numerical analysis with a fk=0.2 can predict the cavity evolution and shedding frequency fairly well. Then, cavitating flow around a marine propeller in non-uniform wake was simulated by PANS method. The calculations show that large cavity volume pulsation as the blade passes through the wake region is resolved better by the PANS method with fk=0.2 than by the RANS method with the k–ε or k–ω SST turbulence models. This can be contributed to the fact that a smaller fk give larger cavity volume pulsations leading to increased cavity volume accelerations and larger pressure fluctuations above the propeller, while a larger fk overestimates the turbulent viscosity along the rear part of the cavity. Finally, it is confirmed from the simulation by the PANS method with fk=0.2 that the whole process of cavitating flow evolution around the propeller in non-uniform wake can be very well reproduced including cavitation inception, sheet cavitation and tip vortex cavitation observed experimentally.

Numerical Simulation of Unsteady Flow Around Propeller Based on CFD Technology

Numerical study of the hydrodynamic performances of surface piercing propeller

Numerical simulation of internal flow in forward-curved centrifugal fan

Three-dimensional Numerical Simulation of the Internal Flow in the Centrifugal Fan

Numerical Simulation of Flow in Centrifugal Pump with Complex Impeller

Numerical Investigation of Unsteady Cavitating Turbulent Flow Around A Full Scale Marine Propeller

Unsteady Numerical Simulation of Cavitating Turbulent Flow Around A Highly Skewed Model Marine Propeller

Partially-Averaged Navier-Stokes method with modified k-ε model for cavitating flow around a marine propeller in a non-uniform wake

Numerical Simulation on Internal Flow in the Screw Centrifugal Pulp Pump

Numerical Simulation of the Cavitation Characteristics of A Mixed-Flow Pump

Parameterized design method and verification of propeller single-passage domain

Numerical Approach Based on Solving 3D Navier–Stokes Equations for Simulation of the Marine Propeller Flow Problems

Numerical Simulation of Inner Flow Field in Centrifugal Impeller with Long, Middle and Short Blades

Numerical Analysis of Cavitation Evolution and Excited Pressure Fluctuation Around a Propeller in Non-Uniform Wake

Numerical prediction of the performance of marine propellers using computational fluid dynamics simulation with transition-sensitive turbulence model

Two-dimensional simulation of the hydrodynamic performance of a cycloidal propeller

Numerical Simulation Of Unsteady Flow Characteristics For Cavitation Around A 3-D Hydrofoil

Numerical simulation to assess hydrodynamic performance of cycloidal propellers during maneuvering

Numerical Study of Cavitating Turbulent Flow Around Propellers: Relationship of Cavity Volume Evolution and Pressure Fluctuation

Numerical study on the scale effects of two-dimensional cycloidal propellers

Numerical simulation of the free-running of a ship using the propeller model and dynamic overset grid method