Abstract:Copper based catalysts with excellent catalytic activity and hydrogen selectivity are widely used in methanol steam reforming (MSR). Yet, the hydrogen pre-reduction step results in hydrogen consumption and energy loss. In addition, the copper nanoparticles are extremely sintered (≥ 300 ℃) to render deactivation caused by the low Taman temperature of 407 ℃. To solve these specific problems, a nano Cu2O/ZnO catalyst with double copper active sites (Cu+ and Cu0) was designed. Cu+ with high reducibility could lessen the catalyst's self-activation time using methanol as the hydrogen carrier. Nano ZnO could support and scatter the active components, effectively prevent the sintering and aggregation of copper nanoclusters. Furthermore, the synergy between the carrier and the active components existed according to H2-TPR. In order to maximize the hydrogen yield and reduce undesirable CO, the quadratic polynomial functions were established to investigate the effects of temperature (T = 450–550 °C), molar ratio of steam to carbon (SCMR=1.5–2.5 mol/mol), and weight-hour space velocity (WHSV=4–6 h−1) on H2 yield (HY) and potential H2 yield (PHY) based on the response surface methodology (RSM) in conjunction with the Box-Behnken design (BBD). The HY (92.1%) and PHY (97.2%) were obtained under T = 550 °C, SCMR= 2.0 mol/mol, and WHSV= 4.7 h−1. Within 36 h, stable 99% hydrogen selectivity was attained at 550 °C. The activity is induced by a new double copper active reaction path substituting the conventional Cu0-determined path. These discoveries provide a basis for the development of efficient catalysts with commercial potential.

Steam reforming of ethanol over Cu/ZrO_2 catalysts II Influences of reaction conditions

Strong Cu/ZnO Interfacial Interaction Induced by ZrO2 Promoter Suppressing the Ethanol Formation in Industrial Methanol Synthesis

Hydrogen Production by Steam Reforming of Ethanol over CuO-La_2O_3/ZrO_2 Catalyst

Steam reforming of ethanol for hydrogen production over NiO/ZnO/ZrO2 catalysts

Steam reforming of bio-ethanol to hydrogen over Cu-La-Zr composite oxide catalysts

Influences Of Reaction Conditions On Steam Reforming Of Methane Over Ni/Zro2 Catalyst.

Catalytic Steam Reforming of Ethanol for Hydrogen Production over Ni/Ceo2-Zro2 Catalysts

Steam reforming of ethanol for hydrogen production: influence of catalyst composition (Ni/Al2O3, Ni/Al2O3–CeO2, Ni/Al2O3–ZnO) and process conditions

Steam reforming of ethanol with zirconia incorporated mesoporous silicate supported catalysts

Steam Reforming of Dimethyl Ether over CuO–ZnO–Al2O3–ZrO2 + ZSM-5: A Kinetic Study

Influence of the component interaction over Cu/ZrO2 catalysts induced with fractionated precipitation method on the catalytic performance for methanol steam reforming

Studies on CuO/La_2O_3-ZrO_2 Catalyst for Production of Hydrogen by Ethanol Steam Reforming

Effect of preparation method on the hydrogen production from methanol steam reforming over binary Cu/ZrO2 catalysts

Hydrogen Production Via Steam Reforming of Methanol on Cu/ZnO/Al2O3 Catalysts: Effects of Al2O3 Precursors

STUDIES ON STEAM REFORMING OF METHANE OVER Ni/ZrO2 CATALYST

Fe–Ni–Ce–Zr-modified CuO–ZnO catalyst for methanol steam reforming

Influences of preparation methods of ZrO2 support and treatment conditions of Cu/ZrO2 catalysts on synthesis of methanol via CO hydrogenation

Hydrogen Production via Methanol Steam Reforming over CuO/ZnO/Al2O3 Catalysts Prepared via Oxalate-Precursor Synthesis

Achieving strong thermal stability in catalytic reforming of methanol over in-situ self-activated nano Cu2O/ZnO catalyst with dual-sites of Cu species

Hydrogen production via steam reforming of methanol using Cu/ZnO/Al 2 O 3 : Effect of catalyst synthesis method and Cu to Zn molar ratio on physico-chemical properties and catalytic performance

From Steam Reforming of Ethanol at Low Temperature over , and Catalysts for Fuel-Cell Application