Abstract:Over Fe-Cu nanoparticles derived from sol-gel synthesis followed by hydrogen reduction at 400 degrees C, helical carbon nanotubes (HCNTs) and carbon nanobelts (CNBs) were synthesized in large quantities in acetylene decomposition at 450 degrees C. The two carbon species could be separated easily as they deposited on different locations of the ceramic plate in which the Fe-Cu nanoparticles were placed. The advantages of this synthetic method are that the approach is simple and environmentally friendly and there is no need of using dilute gas such as argon or nitrogen. Field-emission and transmission electron microscopic investigations reveal that the selectivity to HCNTs (ca. 85%) or to CNBs (ca. 90%) is high. The corresponding yield of carbon species and CNBs is about 27 307% and 9867%, respectively, higher than any of those reported in the literature. It was found that the variation of reduction temperature (from 400 to 450 or 500 degrees C) of Fe2O3/CuO catalyst precursor and the temperature gradient during acetylene decomposition have profound influence on the morphology and yield of HCNTs and CNBs. The magnetic properties and the possible reaction mechanism of HCNTs and CNBs were also investigated in this study.

Thermal Decomposition Of The Carbon Nanotube/Sio2 Precursor Powders - Thermal Analysis Coupled With Mass Spectrometry

Thermal decomposition of the carbon nanotube/SiO 2 precursor powders

Performance of Nano-Caco3 Coated with SiO2 on CO2 Adsorption at High Temperature

The Characterization and Preparation of Nano-Scale Fe Doping Tio2 by Sol-Gel Method (I) - the Crystallization and Thermal Decomposition Process of Fe Doping Tio2 Xerogel Powders Using Thermal Tg-Ir Spectrometry

Properties of Carbon Nano-Tubes–cf/sic Composite by Precursor Infiltration and Pyrolysis Process

Supercooling Behaviour and Non-Isothermal Crystallization Processes of Aqueous Suspensions of Carbon Nanotubes

Studies of synthesizing the SiC nanometer powders by chemical vapor reaction

Thermal CVD synthesis and characterization of silicon nanopowders

Effect Of Nitrogen Doping On The Dissolution Of Oxygen Precipitates In Czochralski Silicon During Rapid Thermal Annealing

Catalytic Decomposition of 1,2-Dichlorobenzene over V2O5/TiO2 Catalysts Blending with Typical Carbon Nanotubes

Nanostructured Hybrid Carbon Nanotube/UltraHigh‐Temperature Ceramic Heterostructures: Microstructure Evolution and Forming Mechanism

Degassing Behavior and Solid State Reaction of Nano-Ti(Cn) Base Cermets in Sintering

Electrical power dissipation in carbon nanotubes on single crystal quartz and amorphous SiO2

Direct Synthesis of Controllable Microstructures of Thermally Stable and Ordered Mesoporous Crystalline Titanium Oxides and Carbide/Carbon Composites

Combustion synthesis of SiC/Al2O3 composite powders with SiC nanowires and their growth mechanism

High Temperature Structure Evolution of Macroporous SiOC Ceramics Prepared by a Sol–gel Method

Thermal Stability of Carbon Nanotubes Probed by Anchored Tungsten Nanoparticles

Oxidation behavior of 3D SiCf/SiBCN composites at 800–1200 °C

Thermal stability of epoxy-silica hybrid materials by thermogravimetric analysis

Characterization and Magnetic Properties of Helical Carbon Nanotubes and Carbon Nanobelts Synthesized in Acetylene Decomposition over Fe−Cu Nanoparticles at 450 °C

The multi-staged formation process of titanium oxide nanotubes and its thermal stability