Abstract:Fundamental understanding of turbulent flow and heat transfer in composite porous-fluid systems, which consists of a fluid-saturated stochastic open-cell metal foam and a flow passing over it, is crucial for fostering technological development in numerous applications such as transpiration cooling in aerospace, packed-bed thermal storage and thermal management of electronic devices. In this work, conjugate heat transfer simulations were adopted to explore the turbulent flow and heat transfer features in a composite porous-fluid system at the pore scale. Simulations were performed to account for the influence of the blockage ratios (i.e., BR = 0.5, 0.8 and 1.0) on pressure drop and heat transfer rate by introducing a new concept called penetration cooling length. Furthermore, the effect of Reynolds numbers (i.e., Re = 1800, 3600 and 7200) at different blockage ratios was investigated in terms of pressure drop, fluid and solid temperatures, interstitial heat transfer coefficient, and flow leakage. Results indicate that for a fixed blockage ratio, as the Reynolds number increases by a factor of 3.0, there is a 14.9-fold increase in the pressure drop and a 2.9-fold increase in the interstitial heat transfer coefficient. Additionally, for a fixed Reynolds number, when the blockage ratio increases by a factor of 2.0, there is a 6.8-fold increase in the pressure drop and a 1.8-fold increase in the interstitial heat transfer coefficient. Flow visualization indicated that the penetration cooling length is influenced by flow leakage from the porous-fluid interface. Results show at small blockage ratios and low Reynolds numbers, a significant portion of the flow from the porous region leaves it to the clear region on top of the porous block. While, at high Reynolds numbers and large blockage ratios, the flow leakage is reduced. Additionally, for a low blockage ratio ( BR < 0.5), the amount of flow leakage depends on the Reynolds number, while it is independent of the Reynolds number for BR > 0.8. Finally, this study introduces a novel correlation for the interstitial heat transfer coefficient derived from conjugate heat transfer pore-scale simulations. The correlation is established on the basis of Reynolds number, blockage ratio, and development length of the metal foam, offering valuable insights into heat transfer phenomena in porous media.

AN EXPERIMENTAL INVESTIGATION ON THE FLOW AND HEAT TRANSFER CHARACTERISTICS FOR ALUMINUM FOAM

Experimental Investigation on the Heat Transfer Performance and Evaporation Temperature Fluctuation of a New-Type Metal Foam Multichannel Heat Pipe

Air-side Performance of Open-Cell Metal Foams for Use in Dehumidifying Heat Exchangers

Unlocking the Thermal Efficiency of Irregular Open-Cell Metal Foams: A Computational Exploration of Flow Dynamics and Heat Transfer Phenomena

Pore-scale Simulation of Forced Convection Heat Transfer under Turbulent Conditions in Open-Cell Metal Foam

Experimental investigation of permeability and Darcy-Forchheimer flow transition in metal foam with high pore density

Experimental study on thermal and flow characteristics of metal foam heat pipe radiator

Analysis of the Heat Transfer in Electronic Radiator Filled with Metal Foam

Experimental study on heat transfer characteristics of flow on an inclined hot metal plate

Effects of channel flow blockage on metal foam heat transfer

Study of Aluminum Foam Material For Heat Dissipation of Heat Source at Varying Heat Generation

Experimental investigation of heat transfer and flow characteristics in finned copper foam heat sinks subjected to jet impingement cooling

Pore-scale conjugate heat transfer analysis of turbulent flow over stochastic open-cell metal foams

Numerical Simulations of Fluid Flow and Heat Transfer through Aluminum and Copper Metal Foam Heat Exchanger – A Comparative Study

Experimental Study on the Thermal Performance of a Finned Metal Foam Heat Sink with Phase Change Material

Thermal management of power electronics with liquid cooled metal foam heat sink

Numerical investigations of the coupled conductive-radiative heat transfer in alumina ceramics

Assessment of the flow behavior and structural performance of open-cell aluminum foams at critical flow conditions of pressure and temperature

Numerical and experimental characterization of high-temperature heat transfer in a ceramic foam with dual-scale porosity

Experimental investigation on confined jet impingement boiling heat transfer characteristics on metal foam cover

Modelling and Numerical Simulation of Fluid Flow and Heat Transfer through Open Celled Metal Foam